Architecture–Property–Function Relationships in Sustainable Polymer Biomaterials: A Critical Framework for Reproducible Green-by-Design Engineering
DOI:
https://doi.org/10.66104/rd2kd349Palavras-chave:
polímero, hidrogel, nanoestructura, multiescala, difusão, propriedades ópticas, aprendizado de máquinaResumo
This review examines how hierarchical architecture influences multifunctional performance in sustainable polymer biomaterials, addressing a persistent limitation in the field: the predominance of composition-centered analyses with insufficient architectural parameterization. To overcome this gap, we adopt an Architecture–Property–Function (APF) framework, in which structural descriptors are treated as primary design variables linking material organization to mechanical behavior, molecular transport, optical attenuation, redox activity, and biological response. A PRISMA-guided literature analysis identified 612 records, from which 94 studies met eligibility criteria requiring explicit linkage between at least one architectural descriptor and a measurable functional outcome. Within this set, a targeted subset of 26 within-study matched datasets was selected for directional quantitative synthesis based on comparability and reporting quality. Across these constrained datasets, directionally consistent trends were observed: increasing ionic crosslink density is associated with a stiffness–transport trade-off; nanoscale dispersion enhances thickness-normalized UV attenuation and stabilizes antioxidant performance; and molecular confinement contributes to improved stability while modulating release behavior. However, these relationships are condition-dependent and vary with descriptor quality, normalization practices, and system-specific variables. The analysis also identifies critical limitations in literature, including widespread reliance on proxy descriptors, inconsistent reporting of architectural parameters, and limited integration of sustainability metrics with biological endpoints. To address these issues, we propose a structured reporting framework and a minimal descriptor set to improve reproducibility and enable future data-driven approaches. Rather than establishing universally transferable design rules, this review delineates evidence-supported architectural tendencies within defined applicability domains, while explicitly outlining their limitations and conditions of validity. This calibrated perspective provides a foundation for more rigorous, reproducible, and ultimately predictive engineering of sustainable polymer biomaterials.
Downloads
Referências
Agrawal, A., & Choudhary, A. (2016). Perspective: Materials informatics and big data: Realization of the “fourth paradigm” of science in materials science. APL Materials, 4, 053208. https://doi.org/10.1063/1.4946894 DOI: https://doi.org/10.1063/1.4946894
Ahmed, E. M. (2015). Hydrogel: Preparation, characterization, and applications. Journal of Advanced Research, 6(2), 105–121. https://doi.org/10.1016/j.jare.2013.07.006 DOI: https://doi.org/10.1016/j.jare.2013.07.006
Alberts, A., Moldoveanu, E.-T., Niculescu, A.-G., & Grumezescu, A. M. (2025). Hydrogels for wound dressings: Applications in burn treatment and chronic wound care. Journal of Composites Science, 9(3), 133. https://doi.org/10.3390/jcs9030133 DOI: https://doi.org/10.3390/jcs9030133
Anastas, P. T., & Warner, J. C. (1998). Green chemistry: Theory and practice. Oxford University Press.
Annabi, N., Tamayol, A., Shin, S. R., Ghaemmaghami, A. M., Peppas, N. A., & Khademhosseini, A. (2014). Surgical materials: Current challenges and nano-enabled solutions. Tissue Engineering Part B: Reviews, 20(2), 1–18. https://doi.org/10.1089/ten.teb.2013.0403
Ansari, M., & Darvishi, A. (2024). A review of the current state of natural biomaterials in wound healing applications. Frontiers in Bioengineering and Biotechnology, 12, 1309541. https://doi.org/10.3389/fbioe.2024.1309541 DOI: https://doi.org/10.3389/fbioe.2024.1309541
Beisl, S., Miltner, A., & Friedl, A. (2017). Lignin from micro- to nanosize: Production methods. Chemical Communications, 53(92), 12390–12393. https://doi.org/10.1039/C7CC06002A
Boateng, J. S., Matthews, K. H., Stevens, H. N. E., & Eccleston, G. M. (2008). Wound healing dressings and drug delivery systems: A review. Journal of Pharmaceutical Sciences, 97(8), 2892–2923. https://doi.org/10.1002/jps.21210 DOI: https://doi.org/10.1002/jps.21210
Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O., & Walsh, A. (2018). Machine learning for molecular and materials science. Nature, 559, 547–555. https://doi.org/10.1038/s41586-018-0337-2 DOI: https://doi.org/10.1038/s41586-018-0337-2
Caló, E., & Khutoryanskiy, V. V. (2015). Biomedical applications of hydrogels: A review of patents and commercial products. European Polymer Journal, 65, 252–267. https://doi.org/10.1016/j.eurpolymj.2014.11.024 DOI: https://doi.org/10.1016/j.eurpolymj.2014.11.024
Chen, Y., Li, X., Zhang, S., & Wang, J. (2023). Machine learning–assisted design of sustainable polymer biomaterials. Advanced Functional Materials, 33(12), 2209876. https://doi.org/10.1002/adfm.202209876 DOI: https://doi.org/10.1002/adfm.202209876
Coogan, T. J., et al. (2025). Digital twin enabled polymer manufacturing… Polymer Journal. https://doi.org/10.1007/s40964-025-01257-4 DOI: https://doi.org/10.1007/s40964-025-01257-4
Cowen, L. M., et al. (2024). Machine learning for materials: opportunities and pitfalls… Next Materials. https://doi.org/10.1016/j.nxmate.2024.100449 DOI: https://doi.org/10.1016/j.nxmate.2024.100449
D'Orazio, J., Jarrett, S., Amaro-Ortiz, A., & Scott, T. (2013). UV radiation and the skin. International Journal of Molecular Sciences, 14(6), 12222–12248. https://doi.org/10.3390/ijms140612222 DOI: https://doi.org/10.3390/ijms140612222
Galvão, T. F., Pansani, T. S. A., & Harrad, D. (2022). A declaração PRISMA 2020: diretriz atualizada para relatar revisões sistemáticas. Epidemiologia e Serviços de Saúde, 31(2), e202201700033. https://doi.org/10.1590/s1679-49742022000200033 DOI: https://doi.org/10.1590/ss2237-9622202200011
Goliszek-Chabros, M., et al. (2025). Lignin nanoparticle-enhanced PVA foils for UVB/UVC protection. Scientific Reports. https://doi.org/10.1038/s41598-025-19753-6 DOI: https://doi.org/10.1038/s41598-025-19753-6
Grant, G. T., Morris, E. R., Rees, D. A., Smith, P. J. C., & Thom, D. (1973). Biological interactions between polysaccharides and divalent cations: The egg-box model. FEBS Letters, 32(1), 195–198. https://doi.org/10.1016/0014-5793(73)80770-7 DOI: https://doi.org/10.1016/0014-5793(73)80770-7
Gromkowska-Kępka, K. J., Puścion-Jakubik, A., Markiewicz-Żukowska, R., & Socha, K. (2020). The impact of ultraviolet radiation on skin photoaging—Review of in vitro studies. Journal of Cosmetic Dermatology, 19(8), 1964–1972. https://doi.org/10.1111/jocd.13411 DOI: https://doi.org/10.1111/jocd.13411
Hernández-González, A. C., Téllez-Jurado, L., & Rodríguez-Lorenzo, L. M. (2020). Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review. Carbohydrate Polymers, 229, 115514. https://doi.org/10.1016/j.carbpol.2019.115514 DOI: https://doi.org/10.1016/j.carbpol.2019.115514
Ho, T. T. P., Tran, H. A., Doan, V. K., Maitz, J., Li, Z., Wise, S. G., Lim, K. S., & Rnjak-Kovacina, J. (2024). Natural polymer-based materials for wound healing applications. Advanced NanoBiomed Research, 4(5), 2300131. https://doi.org/10.1002/anbr.202300131 DOI: https://doi.org/10.1002/anbr.202300131
Kai, D., Tan, M. J., Chee, P. L., Chua, Y. K., Yap, Y. L., & Loh, X. J. (2016). Towards lignin-based functional materials in a sustainable world. Green Chemistry, 18, 1175–1200. https://doi.org/10.1039/C5GC02616D DOI: https://doi.org/10.1039/C5GC02616D
Lamberti, G., et al. (2020). Life cycle assessment in polymeric systems: methods and applications. Polymers, 12(6), 1212. https://doi.org/10.3390/polym12061212 DOI: https://doi.org/10.3390/polym12061212
Lee, K. Y., & Mooney, D. J. (2012). Alginate: Properties and biomedical applications. Progress in Polymer Science, 37(1), 106–126. https://doi.org/10.1016/j.progpolymsci.2011.06.003 DOI: https://doi.org/10.1016/j.progpolymsci.2011.06.003
Li, J., & Mooney, D. J. (2016). Designing hydrogels for controlled drug delivery. Nature Reviews Materials, 1, 16071. https://doi.org/10.1038/natrevmats.2016.71 DOI: https://doi.org/10.1038/natrevmats.2016.71
Li, X., et al. (2022). Functional biomaterials (editorial/overview de “functional design” útil como framing). APL Bioengineering, 6(1), 010401. https://doi.org/10.1063/5.0078930 DOI: https://doi.org/10.1063/5.0078930
Liang, T., Ma, Y., Jiang, Z., et al. (2024). New insights into greener skin healthcare protection: lignin nanoparticles as additives to develop natural-based sunscreens with high UV protection. Carbon Resources Conversion, 7(4), 100227. https://doi.org/10.1016/j.crcon.2024.100227 DOI: https://doi.org/10.1016/j.crcon.2024.100227
Liu, R., et al. (2023). Applied machine learning as a driver for polymeric biomaterials design. Nature Communications. https://doi.org/10.1038/s41467-023-40459-8 DOI: https://doi.org/10.1038/s41467-023-40459-8
Lobato-Peralta, D. R., et al. (2021). Comparison of lignin extraction processes: economic and environmental assessment. Journal of Cleaner Production, 293, 126123. https://doi.org/10.1016/j.jclepro.2021.126123 DOI: https://doi.org/10.1016/j.jclepro.2021.126123
Mostafavi, A., et al. (2024). Life-cycle and sustainability assessment for next-generation materials… Environmental Science & Technology. https://doi.org/10.1021/acs.est.4c08298 DOI: https://doi.org/10.1021/acs.est.4c08298
Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., et al. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 DOI: https://doi.org/10.1136/bmj.n71
Peppas, N. A., Huang, Y., Torres-Lugo, M., Ward, J. H., & Zhang, J. (2000). Physicochemical foundations and structural design of hydrogels in medicine and biology. Annual Review of Biomedical Engineering, 2, 9–29. https://doi.org/10.1146/annurev.bioeng.2.1.9 DOI: https://doi.org/10.1146/annurev.bioeng.2.1.9
Peters, J. T., Wechsler, M. E., & Peppas, N. A. (2021). Advanced biomedical hydrogels: molecular architecture and its impact on medical applications. Regenerative Biomaterials, 8(6), rbab060. https://doi.org/10.1093/rb/rbab060 DOI: https://doi.org/10.1093/rb/rbab060
Posoknistakul, P., et al. (2022). Preparation of light-colored lignin nanoparticles for broad-spectrum sunscreens. Polymers, 14(19), 4196. https://doi.org/10.3390/polym14194196 DOI: https://doi.org/10.3390/polym14194196
Qian, Y., Qiu, X., & Zhu, S. (2015). Lignin: A nature-inspired sun blocker for broad-spectrum sunscreens. Green Chemistry, 17, 320–324. https://doi.org/10.1039/C4GC01927C DOI: https://doi.org/10.1039/C4GC01333F
Rinaudo, M. (2008). Main properties and current applications of alginates. Progress in Polymer Science, 33(4), 397–422. https://doi.org/10.1016/j.progpolymsci.2007.11.002 DOI: https://doi.org/10.1016/j.progpolymsci.2007.11.002
Sadeghifar, H., & Ragauskas, A. J. (2020). Lignin as a UV light blocker—A review. Polymers, 12(5), 1134. https://doi.org/10.3390/polym12051134 DOI: https://doi.org/10.3390/polym12051134
Salminen, A., Kaarniranta, K., & Kauppinen, A. (2022). Photoaging: UV radiation-induced inflammation and immunosuppression accelerate the aging process in the skin. Inflammation Research, 71(7–8), 817–831. https://doi.org/10.1007/s00011-022-01598-8 DOI: https://doi.org/10.1007/s00011-022-01598-8
Sheldon, R. A. (2017). The E factor 25 years on: The rise of green chemistry and sustainability. Green Chemistry, 19(1), 18–43. https://doi.org/10.1039/C6GC02157C DOI: https://doi.org/10.1039/C6GC02157C
Siepmann, J., & Siepmann, F. (2012). Modeling of diffusion controlled drug delivery. Journal of Controlled Release, 161(2), 351–362. https://doi.org/10.1016/j.jconrel.2011.10.006 DOI: https://doi.org/10.1016/j.jconrel.2011.10.006
Sirviö, J. A., Visanko, M., & Liimatainen, H. (2016). Strong, self-standing lignin-containing nanocellulose composite films with UV blocking properties. ACS Sustainable Chemistry & Engineering, 4(10), 5335–5342. https://doi.org/10.1021/acssuschemeng.6b01591
Smidsrød, O. (1974). Molecular basis for some physical properties of alginates in the gel state. Faraday Discussions of the Chemical Society, 57, 263–274. https://doi.org/10.1039/DC9745700263 DOI: https://doi.org/10.1039/DC9745700263
Tran, M. H., Phan, D.-P., & Lee, E. Y. (2021). Review on lignin modifications toward natural UV protection ingredient for lignin-based sunscreens. Green Chemistry, 23(13), 4633–4646. https://doi.org/10.1039/D1GC01139A DOI: https://doi.org/10.1039/D1GC01139A
Wan, M., et al. (2025). From green synthesis to functional performance: PMI/E-factor-guided manufacturing of biomaterials… International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2025.141062 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141062
Wang, H., et al. (2024). Machine learning in biomaterials… Small Methods. https://doi.org/10.1002/smtd.202300553 DOI: https://doi.org/10.1002/smtd.202300553
Xing, Q., Ruch, D., Dubois, P., Wu, L., & Wang, W.-J. (2017). Biodegradable and high-performance poly(butylene adipate-co-terephthalate)–lignin UV-blocking films. ACS Sustainable Chemistry & Engineering, 5(11), 10342–10351. https://doi.org/10.1021/acssuschemeng.7b02370 DOI: https://doi.org/10.1021/acssuschemeng.7b02370
Yang, R., Gupta, A., & Zhao, B. (2024). Digital twins and AI-guided optimization of bio-based materials. ACS Applied Materials & Interfaces, 16(5), 6231–6245. https://doi.org/10.1021/acsami.3c18945
Yang, W., Fortunati, E., Gao, D., Balestra, G. M., Giovanale, G., He, X., Torre, L., Kenny, J. M., & Puglia, D. (2021). Valorization of lignin in polymer composites: A review. Composites Part B: Engineering, 215, 108833. https://doi.org/10.1016/j.compositesb.2021.108833 DOI: https://doi.org/10.1016/j.compositesb.2021.108833
Zevallos Torres, L. A., et al. (2020). Lignin as a potential source of high-added value compounds: A review. Journal of Cleaner Production, 263, 121499. https://doi.org/10.1016/j.jclepro.2020.121499 DOI: https://doi.org/10.1016/j.jclepro.2020.121499
Zhang, H., et al. (2023). Flexible and efficient UV-shielding composite films… lignin nanoparticles… Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.09.004 DOI: https://doi.org/10.1016/j.jmrt.2023.09.004
Zhang, X., Liu, W., Liu, W., & Qiu, X. (2020). High performance PVA/lignin nanocomposite films with excellent water vapor barrier and UV-shielding properties. International Journal of Biological Macromolecules, 142, 551–558. https://doi.org/10.1016/j.ijbiomac.2019.09.129 DOI: https://doi.org/10.1016/j.ijbiomac.2019.09.129
Zhang, Y., Wang, Y., Zhou, J., & Chen, X. (2020). Stabilization of bioactive compounds via nanoencapsulation: Mechanisms and applications. Food Hydrocolloids, 101, 105538. https://doi.org/10.1016/j.foodhyd.2019.105538 DOI: https://doi.org/10.1016/j.foodhyd.2019.105538
Standards and Regulatory Documents
ASTM International. (2016). Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials (ASTM G154-16). ASTM International. https://doi.org/10.1520/G0154-16 DOI: https://doi.org/10.1520/G0154-16
International Organization for Standardization. (2018). ISO 10993-1: Biological evaluation of medical devices—Part 1: Evaluation and testing within a risk management process. ISO. https://www.iso.org/standard/68936.html Typical reported endpoints include >80% cell viability in fibroblast assays and absence of hemolysis under ISO 10993‑5/‑4 screening, illustrating the need for architecture-controlled formulations to meet regulatory benchmarks.
U.S. Food and Drug Administration. (2023). Use of International Standard ISO 10993-1, “Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk management process” (Guidance). Typical reported endpoints include >80% cell viability in fibroblast assays and absence of hemolysis under ISO 10993‑5/‑4 screening, illustrating the need for architecture-controlled formulations to meet regulatory benchmarks.
U.S. Food and Drug Administration. (2026). 21 CFR § 878.4020—Occlusive wound dressing. Electronic Code of Federal Regulations. https://www.ecfr.gov/current/title-21/chapter-I/subchapter-H/part-878/subpart-E/section-878.4020
Downloads
Publicado
Edição
Seção
Licença
Direitos autorais (c) 2026 Luana Costa de Souza, Ariene de Morais Alves, Boutros Sarrouh, Igor José Boggione Santos, Érika Cristina Cren, Renata Carolina Zanetti Lofrano

Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
Autores que publicam nesta revista concordam com os seguintes termos:
- Autores mantém os direitos autorais e concedem à revista o direito de primeira publicação, com o trabalho simultaneamente licenciado sob a Licença Creative Commons Attribution que permite o compartilhamento do trabalho com reconhecimento da autoria e publicação inicial nesta revista;
- Autores têm autorização para assumir contratos adicionais separadamente, para distribuição não-exclusiva da versão do trabalho publicada nesta revista (ex.: publicar em repositório institucional ou como capítulo de livro), com reconhecimento de autoria e publicação inicial nesta revista, desde que adpatado ao template do repositório em questão;
- Autores têm permissão e são estimulados a publicar e distribuir seu trabalho online (ex.: em repositórios institucionais ou na sua página pessoal) a qualquer ponto antes ou durante o processo editorial, já que isso pode gerar alterações produtivas, bem como aumentar o impacto e a citação do trabalho publicado (Veja O Efeito do Acesso Livre).
- Os autores são responsáveis por inserir corretamente seus dados, incluindo nome, palavras-chave, resumos e demais informações, definindo assim a forma como desejam ser citados. Dessa forma, o corpo editorial da revista não se responsabiliza por eventuais erros ou inconsistências nesses registros.
POLÍTICA DE PRIVACIDADE
Os nomes e endereços informados nesta revista serão usados exclusivamente para os serviços prestados por esta publicação, não sendo disponibilizados para outras finalidades ou a terceiros.
Obs: todo o conteúdo do trabalho é de responsabilidade do autor e orientador.
