A COMPUTATIONAL TOOL FOR DETERMINING SAMPLING PARAMETERS (k and α) BASED ON THE HETEROGENEITY TEST (HT)
DOI:
https://doi.org/10.66104/64hdqf16Keywords:
sampling, Pierre Gy theory, heterogeneity test, sampling parameters, software developmentAbstract
The continuous depletion of high-grade deposits, associated with increasing market demands, has intensified the need for more rigorous and reliable quality control in mining operations. Decision-making is often based on small samples, typically in grams or kilograms, taken from significantly larger lots, which can reach thousands of tons. Pierre Gy's sampling theory is widely applied to particulate materials; however, its general equation requires parameters that are often unavailable in practice. To overcome this limitation, the Heterogeneity Test (HT) has been widely used to calibrate sampling parameters. This study presents the development of a software tool for determining the parameters k and α and for simulating sampling protocols using the HT method. The software was developed in Pascal using the Lazarus integrated development environment (IDE) and includes routines for log-log linear regression and determination of the coefficient of determination (R²). Case studies from the literature were used for numerical verification. The results showed numerical agreement with published data, with differences below 0,67%, demonstrating the numerical verification of the developed tool. The software proved to be an efficient solution for supporting sampling protocol design and simulation, providing practical decision-making support in mining operations. As a future development, it is recommended to implement computational routines based on mathematical optimization models for the automatic design and optimization of sampling protocols under operational and precision constraints.Downloads
References
CHIEREGATI, A. C. A brief review of heterogeneity tests for estimating the variance of the fundamental sampling error. Sampling Science & Technology, 2024. DOI: 10.62178/sst.002.003. DOI: https://doi.org/10.62178/sst.002.003
CHIEREGATI, A. C. Comparison between K and alpha sampling constants with the Pierre Gy's factors for bauxite. REM – International Engineering Journal, 2023a. DOI: 10.1590/0370-44672022760033. DOI: https://doi.org/10.1590/0370-44672022760033
CHIEREGATI, A. C.; PITARD, F. F. Amostragem. In: LUZ, A. B.; FRANÇA, S. C. A.; BRAGA, P. F. Tratamento de minérios. Rio de Janeiro: CETEM, 2018. p. 27-64.
CHIEREGATI, A. C. et al. A comparison between the standard heterogeneity test and the simplified segregation free analysis for sampling protocol optimisation. Minerals, v. 13, n. 5, p. 680, 2023b. DOI: 10.3390/min13050680. DOI: https://doi.org/10.3390/min13050680
DUBÉ, J.-S.; ESBENSEN, K. H. Estimating the heterogeneity invariant using size-density classes: the case of contaminated soil and complex materials. TOS Forum, 2022. DOI: 10.1255/tosf.171. DOI: https://doi.org/10.1255/tosf.171
FERNANDES, F. L. et al. Heterogeneity test for optimising nickel sampling protocols. REM – International Engineering Journal, 2020. DOI: 10.1590/0370-44672019730030. DOI: https://doi.org/10.1590/0370-44672019730030
GÓES, M. A. C.; LUZ, A. B.; POSSA, M. V. Amostragem. Rio de Janeiro: CETEM/MCT, 2010.
GY, P. M. Sampling of heterogeneous and dynamic material systems: theories of heterogeneity, sampling and homogenizing. Amsterdam: Elsevier, 1992.
GY, P. Sampling of discrete materials: a new introduction to the theory of sampling. I. Qualitative approach. Chemometrics and Intelligent Laboratory Systems, v. 74, n. 1, p. 7-24, 2004. DOI: https://doi.org/10.1016/S0169-7439(04)00167-4
HOLMES, R. J. Correct sampling and measurement: the foundation of accurate metallurgical accounting. Chemometrics and Intelligent Laboratory Systems, v. 74, n. 1, p. 71-83, 2004. DOI: https://doi.org/10.1016/j.chemolab.2004.03.019
LYMAN, G. Gy's discrete heterogeneity and the grouping and segregation variance. TOS Forum, 2022. DOI: 10.1255/tosf.169. DOI: https://doi.org/10.1255/tosf.169
MAGALHÃES, M. F. et al. The use of DEM for optimising an industrial Vezin sampler operation. Minerals, v. 13, n. 11, p. 1460, 2023. DOI: 10.3390/min13111460. DOI: https://doi.org/10.3390/min13111460
MARCOTTE, D.; DUTAUT, R. Linking Gy's formula to QA/QC duplicates statistics. Mathematical Geosciences, 2021. DOI: 10.1007/S11004-020-09894-X. DOI: https://doi.org/10.1007/s11004-020-09894-x
MINKKINEN, P. O.; ESBENSEN, K. H. Sampling of particulate materials with significant spatial heterogeneity: theoretical modification of grouping and segregation factors involved with correct sampling errors: Fundamental Sampling Error and Grouping and Segregation Error. Analytica Chimica Acta, v. 1049, p. 47-64, 2019. DOI: https://doi.org/10.1016/j.aca.2018.10.056
MINNITT, R. M. et al. Calibration of K and alpha (α) for bulk commodities. TOS Forum, 2022. DOI: 10.1255/tosf.131. DOI: https://doi.org/10.1255/tosf.131
OLIVÉ, Amanda Nogueira. Teste de heterogeneidade como método de otimização do protocolo de amostragem em um projeto de concentração de minério de ouro. Trabalho de conclusão de curso. UFOP. 2019.
PITARD, F. F. Effects of residual variances on the estimation of the variance of the Fundamental Error. Chemometrics and Intelligent Laboratory Systems, v. 74, n. 1, p. 149-164, 2004. DOI: https://doi.org/10.1016/j.chemolab.2004.03.009
PITARD, F. F. Theory of sampling and sampling practice. 3. ed. Boca Raton: Chapman and Hall/CRC, 2019. DOI: https://doi.org/10.1201/9781351105934
PRADO, G. C. et al. An automated approach to the heterogeneity test for sampling protocol optimization. Minerals, v. 14, n. 4, p. 434, 2024. DOI: 10.3390/min14040434. DOI: https://doi.org/10.3390/min14040434
SVENSMARK, B. The extended Gy's formula. TOS Forum, 2022. DOI: 10.1255/tosf.179. DOI: https://doi.org/10.1255/tosf.133
VARGAS, F. G. R. G. C. et al. Otimização de protocolo de preparação de amostras em laboratório de análises físicas. In: 46. SEMINÁRIO DE REDUÇÃO DE MINÉRIO DE FERRO E MATÉRIAS-PRIMAS, 17. SIMPÓSIO BRASILEIRO DE MINÉRIO DE FERRO, 4. SIMPÓSIO BRASILEIRO DE AGLOMERAÇÃO DE MINÉRIO DE FERRO, 2016. Anais [...]. São Paulo: ABM, 2016. p. 147-153.
VILLANOVA, F. L. D. S. P. Estudo do erro fundamental de amostragem: uma comparação entre o teste de heterogeneidade e o teste da árvore no quartzo fumê na Mina Lamego (Sabará, MG). 2018. Tese (Doutorado) – Universidade de São Paulo, São Paulo, 2018.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jacinto Tchipa Daniel Cumena, Vladmir Kronemberger Alves

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish in this journal agree to the following terms:
Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution License, which permits the sharing of the work with proper acknowledgment of authorship and initial publication in this journal;
Authors are authorized to enter into separate, additional agreements for the non-exclusive distribution of the version of the work published in this journal (e.g., posting in an institutional repository or publishing it as a book chapter), provided that authorship and initial publication in this journal are properly acknowledged, and that the work is adapted to the template of the respective repository;
Authors are permitted and encouraged to post and distribute their work online (e.g., in institutional repositories or on their personal websites) at any point before or during the editorial process, as this may lead to productive exchanges and increase the impact and citation of the published work (see The Effect of Open Access);
Authors are responsible for correctly providing their personal information, including name, keywords, abstracts, and other relevant data, thereby defining how they wish to be cited. The journal’s editorial board is not responsible for any errors or inconsistencies in these records.
PRIVACY POLICY
The names and email addresses provided to this journal will be used exclusively for the purposes of this publication and will not be made available for any other purpose or to third parties.
Note: All content of the work is the sole responsibility of the author and the advisor.
