Architecture–Property–Function Relationships in Sustainable Polymer Biomaterials: A Critical Framework for Reproducible Green-by-Design Engineering

Authors

DOI:

https://doi.org/10.66104/rd2kd349

Keywords:

polymer, hydrogel, nanostructure, multiscale, diffusion, optical properties, machine learning

Abstract

This review examines how hierarchical architecture influences multifunctional performance in sustainable polymer biomaterials, addressing a persistent limitation in the field: the predominance of composition-centered analyses with insufficient architectural parameterization. To overcome this gap, we adopt an Architecture–Property–Function (APF) framework, in which structural descriptors are treated as primary design variables linking material organization to mechanical behavior, molecular transport, optical attenuation, redox activity, and biological response. A PRISMA-guided literature analysis identified 612 records, from which 94 studies met eligibility criteria requiring explicit linkage between at least one architectural descriptor and a measurable functional outcome. Within this set, a targeted subset of 26 within-study matched datasets was selected for directional quantitative synthesis based on comparability and reporting quality. Across these constrained datasets, directionally consistent trends were observed: increasing ionic crosslink density is associated with a stiffness–transport trade-off; nanoscale dispersion enhances thickness-normalized UV attenuation and stabilizes antioxidant performance; and molecular confinement contributes to improved stability while modulating release behavior. However, these relationships are condition-dependent and vary with descriptor quality, normalization practices, and system-specific variables. The analysis also identifies critical limitations in literature, including widespread reliance on proxy descriptors, inconsistent reporting of architectural parameters, and limited integration of sustainability metrics with biological endpoints. To address these issues, we propose a structured reporting framework and a minimal descriptor set to improve reproducibility and enable future data-driven approaches. Rather than establishing universally transferable design rules, this review delineates evidence-supported architectural tendencies within defined applicability domains, while explicitly outlining their limitations and conditions of validity. This calibrated perspective provides a foundation for more rigorous, reproducible, and ultimately predictive engineering of sustainable polymer biomaterials.
Views: 251Downloads: 132

Downloads

Download data is not yet available.

Author Biographies

  • Luana Costa de Souza, Master in Chemical Engineering/PPGEQ, Ouro Branco, MG, Brazil. Federal University of São João del-Rei/UFSJ.

    Bachelor in Food Engineering at the Federal University of Maranhão and master in Chemical Engineering at the Federal University of São João del-Rei. Possess experience in scientific research in the areas of food science and technology, with work in laboratory activities, development of research projects and participation in academic events. I also work in consultancy in the food area, with experience in the production of labels for dairy products and in carrying out training in Manufacturing Practice Boas (BPF). She was awarded the Young Scientist Award granted by the Fundação de Amparo à Pesquisa e ao Desenvolvimento Científico e Tecnológico do Maranhão (FAPEMA), in recognition of research on fish upcycling and the circular food economy. We address the following research topics: development of biofilms and biomaterials applied to food conservation; intelligent packaging (smart packaging); sustainability and circular economy in the food chain; utilization of agro-industrial waste and development of sustainable materials.

  • Ariene de Morais Alves, Master in Chemical Engineering/PPGEQ, Ouro Branco, MG, Brazil. Federal University of São João del-Rei/UFSJ.

    Bachelor in Food Engineering at the Federal University of Maranhão and Master in Chemistry Engineering at the Federal University of São João del-Rei. During his graduation, he dedicated himself to scientific initiation projects aimed at drug development, an experience that awakened his interest in the interfaces between engineering, health and technology. Subsequently, without mastering, he deepened his attuação in the area of ​​engineering of reações and development of materials, with a focus on biomaterials and sustainability. Their research focused on the development of alginate biofilms containing natural pH bioindicators obtained from Hibiscus sabdariffa L., with potential application in intelligent packaging capable of monitoring food quality. In addition to academic training, with practical experience in the area of ​​quality control, I tend to work at the company Friobom Comércio de Frios e Transportes LTDA, where you have contact with conformity verification routines and process support.

  • Boutros Sarrouh, Department of Chemistry, Biotechnology and Bioprocess Engineering/DQBIO, Ouro Branco, MG, Brazil. Federal University of São João del-Rei/UFSJ.

    Adjunct Professor IV of the Department of Chemistry, Biotechnology and Bioprocess Engineering (DQBIO) of the Federal University of São João del-Rei, Campus Alto Paraopeba, Ouro Branco/MG. Possessed a Bachelor's degree in Chemistry from the Beirute Arab University/Lebanon, a Master's degree in Chemical Engineering in Process Analysis in the Chemical Industry from the Central University of Las Villas-UCLV/Cuba, a Master's degree in Industrial Biotechnology from the University of São Paulo-USP/Brazil, and a Post-Doctorate from the Department of Biological Sciences at the Federal University of Mines. Gerais (UFMG). He leads a research group focused on the development of projects aimed at the area of ​​scaling and production of bioproducts from agro-industrial waste renewed by chemical and biological processes.

  • Igor José Boggione Santos, Department of Chemistry, Biotechnology and Bioprocess Engineering/DQBIO, Ouro Branco, MG, Brazil. Federal University of São João del-Rei/UFSJ.

    Adjunct Professor in the Department of Chemistry, Biotechnology and Bioprocess Engineering. Graduated in high school and with a degree in Chemistry from the Federal University of Viçosa with a technological emphasis, where he went directly to the Doctorate in the area of ​​Physics-Chemistry concentration. Junior Postdoctorate at the Laboratório de Operações e Processos (LOP) of the Department of Food Technologies at the Federal University of Viçosa. He is the leader of the Nanotec Research Group - Nanotechnology in Bioprocesses, which carries out research in the area of ​​nanotechnology and thermodynamics. The main research topics are: nanotechnology in packaging, nanotechnology for new dairy products, nanotechnology for waste treatment, nanosensors for determination: herbicides in foods; Molecules released by milk cows; Non-leite lipids.

  • Érika Cristina Cren, Department of Chemical Engineering/DEQ, School of Engineering, Universidade Federal de Minas Gerais (EE/UFMG), Belo Horizonte, MG, Brazil.

    Graduated in Food Engineering from the State University of Campinas (2002), Master in Food Engineering from the State University of Campinas (2005) and PhD in Food Engineering from the State University of Campinas (2009). Associate Professor of the Department of Chemical Engineering / DEQ of the Engineering School of the Federal University of Minas Gerais - EE/UFMG. I have experience in the area of ​​Food Engineering, Science and Technology, with an emphasis on Food Engineering, mainly working on the following topics: Adsorption, extraction, separation and purification processes of biocomposts, ionic exchange resins, graxos systems, solid-liquid balance. Currently you have interests in the areas of bioprocesses, biorefineries and sustainable production processes.

  • Renata Carolina Zanetti Lofrano, Department of Chemical Engineering/DEQUI, Ouro Branco, MG, Brazil. Federal University of São João del-Rei/UFSJ.

    Full Professor of the Department of Chemical Engineering of the Federal University of São João Del Rei - Alto Paraopeba Campus (DEQUI/UFSJ/CAP). Body member
    permanent program of the Post-Graduation Program in Chemical Engineering (PPGEQ). Bachelor's degree in Chemistry at the Faculty of Philosophy of Sciences and Letters of Ribeirão Preto/USP (1996), Master's degree in Sciences at the Faculty of Philosophy of Sciences and Letters of Ribeirão Preto/USP (1998), PhD in Sciences at the Faculty of Philosophy Ciências e Letras de Ribeirão Preto/USP (2002) and postdoctorate in the area of ​​nanotechnology by the Faculdade de Filosofia Ciências e Letras de Ribeirão Preto/USP (2004). Attach us to the following research topics: green chemistry; bioproducts, biopolymers and sustainable biomaterials; bioactive and intelligent biopackaging for sustainability; nanomaterials function and sustain.

References

Agrawal, A., & Choudhary, A. (2016). Perspective: Materials informatics and big data: Realization of the “fourth paradigm” of science in materials science. APL Materials, 4, 053208. https://doi.org/10.1063/1.4946894 DOI: https://doi.org/10.1063/1.4946894

Ahmed, E. M. (2015). Hydrogel: Preparation, characterization, and applications. Journal of Advanced Research, 6(2), 105–121. https://doi.org/10.1016/j.jare.2013.07.006 DOI: https://doi.org/10.1016/j.jare.2013.07.006

Alberts, A., Moldoveanu, E.-T., Niculescu, A.-G., & Grumezescu, A. M. (2025). Hydrogels for wound dressings: Applications in burn treatment and chronic wound care. Journal of Composites Science, 9(3), 133. https://doi.org/10.3390/jcs9030133 DOI: https://doi.org/10.3390/jcs9030133

Anastas, P. T., & Warner, J. C. (1998). Green chemistry: Theory and practice. Oxford University Press.

Annabi, N., Tamayol, A., Shin, S. R., Ghaemmaghami, A. M., Peppas, N. A., & Khademhosseini, A. (2014). Surgical materials: Current challenges and nano-enabled solutions. Tissue Engineering Part B: Reviews, 20(2), 1–18. https://doi.org/10.1089/ten.teb.2013.0403

Ansari, M., & Darvishi, A. (2024). A review of the current state of natural biomaterials in wound healing applications. Frontiers in Bioengineering and Biotechnology, 12, 1309541. https://doi.org/10.3389/fbioe.2024.1309541 DOI: https://doi.org/10.3389/fbioe.2024.1309541

Beisl, S., Miltner, A., & Friedl, A. (2017). Lignin from micro- to nanosize: Production methods. Chemical Communications, 53(92), 12390–12393. https://doi.org/10.1039/C7CC06002A

Boateng, J. S., Matthews, K. H., Stevens, H. N. E., & Eccleston, G. M. (2008). Wound healing dressings and drug delivery systems: A review. Journal of Pharmaceutical Sciences, 97(8), 2892–2923. https://doi.org/10.1002/jps.21210 DOI: https://doi.org/10.1002/jps.21210

Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O., & Walsh, A. (2018). Machine learning for molecular and materials science. Nature, 559, 547–555. https://doi.org/10.1038/s41586-018-0337-2 DOI: https://doi.org/10.1038/s41586-018-0337-2

Caló, E., & Khutoryanskiy, V. V. (2015). Biomedical applications of hydrogels: A review of patents and commercial products. European Polymer Journal, 65, 252–267. https://doi.org/10.1016/j.eurpolymj.2014.11.024 DOI: https://doi.org/10.1016/j.eurpolymj.2014.11.024

Chen, Y., Li, X., Zhang, S., & Wang, J. (2023). Machine learning–assisted design of sustainable polymer biomaterials. Advanced Functional Materials, 33(12), 2209876. https://doi.org/10.1002/adfm.202209876 DOI: https://doi.org/10.1002/adfm.202209876

Coogan, T. J., et al. (2025). Digital twin enabled polymer manufacturing… Polymer Journal. https://doi.org/10.1007/s40964-025-01257-4 DOI: https://doi.org/10.1007/s40964-025-01257-4

Cowen, L. M., et al. (2024). Machine learning for materials: opportunities and pitfalls… Next Materials. https://doi.org/10.1016/j.nxmate.2024.100449 DOI: https://doi.org/10.1016/j.nxmate.2024.100449

D'Orazio, J., Jarrett, S., Amaro-Ortiz, A., & Scott, T. (2013). UV radiation and the skin. International Journal of Molecular Sciences, 14(6), 12222–12248. https://doi.org/10.3390/ijms140612222 DOI: https://doi.org/10.3390/ijms140612222

Galvão, T. F., Pansani, T. S. A., & Harrad, D. (2022). A declaração PRISMA 2020: diretriz atualizada para relatar revisões sistemáticas. Epidemiologia e Serviços de Saúde, 31(2), e202201700033. https://doi.org/10.1590/s1679-49742022000200033 DOI: https://doi.org/10.1590/ss2237-9622202200011

Goliszek-Chabros, M., et al. (2025). Lignin nanoparticle-enhanced PVA foils for UVB/UVC protection. Scientific Reports. https://doi.org/10.1038/s41598-025-19753-6 DOI: https://doi.org/10.1038/s41598-025-19753-6

Grant, G. T., Morris, E. R., Rees, D. A., Smith, P. J. C., & Thom, D. (1973). Biological interactions between polysaccharides and divalent cations: The egg-box model. FEBS Letters, 32(1), 195–198. https://doi.org/10.1016/0014-5793(73)80770-7 DOI: https://doi.org/10.1016/0014-5793(73)80770-7

Gromkowska-Kępka, K. J., Puścion-Jakubik, A., Markiewicz-Żukowska, R., & Socha, K. (2020). The impact of ultraviolet radiation on skin photoaging—Review of in vitro studies. Journal of Cosmetic Dermatology, 19(8), 1964–1972. https://doi.org/10.1111/jocd.13411 DOI: https://doi.org/10.1111/jocd.13411

Hernández-González, A. C., Téllez-Jurado, L., & Rodríguez-Lorenzo, L. M. (2020). Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review. Carbohydrate Polymers, 229, 115514. https://doi.org/10.1016/j.carbpol.2019.115514 DOI: https://doi.org/10.1016/j.carbpol.2019.115514

Ho, T. T. P., Tran, H. A., Doan, V. K., Maitz, J., Li, Z., Wise, S. G., Lim, K. S., & Rnjak-Kovacina, J. (2024). Natural polymer-based materials for wound healing applications. Advanced NanoBiomed Research, 4(5), 2300131. https://doi.org/10.1002/anbr.202300131 DOI: https://doi.org/10.1002/anbr.202300131

Kai, D., Tan, M. J., Chee, P. L., Chua, Y. K., Yap, Y. L., & Loh, X. J. (2016). Towards lignin-based functional materials in a sustainable world. Green Chemistry, 18, 1175–1200. https://doi.org/10.1039/C5GC02616D DOI: https://doi.org/10.1039/C5GC02616D

Lamberti, G., et al. (2020). Life cycle assessment in polymeric systems: methods and applications. Polymers, 12(6), 1212. https://doi.org/10.3390/polym12061212 DOI: https://doi.org/10.3390/polym12061212

Lee, K. Y., & Mooney, D. J. (2012). Alginate: Properties and biomedical applications. Progress in Polymer Science, 37(1), 106–126. https://doi.org/10.1016/j.progpolymsci.2011.06.003 DOI: https://doi.org/10.1016/j.progpolymsci.2011.06.003

Li, J., & Mooney, D. J. (2016). Designing hydrogels for controlled drug delivery. Nature Reviews Materials, 1, 16071. https://doi.org/10.1038/natrevmats.2016.71 DOI: https://doi.org/10.1038/natrevmats.2016.71

Li, X., et al. (2022). Functional biomaterials (editorial/overview de “functional design” útil como framing). APL Bioengineering, 6(1), 010401. https://doi.org/10.1063/5.0078930 DOI: https://doi.org/10.1063/5.0078930

Liang, T., Ma, Y., Jiang, Z., et al. (2024). New insights into greener skin healthcare protection: lignin nanoparticles as additives to develop natural-based sunscreens with high UV protection. Carbon Resources Conversion, 7(4), 100227. https://doi.org/10.1016/j.crcon.2024.100227 DOI: https://doi.org/10.1016/j.crcon.2024.100227

Liu, R., et al. (2023). Applied machine learning as a driver for polymeric biomaterials design. Nature Communications. https://doi.org/10.1038/s41467-023-40459-8 DOI: https://doi.org/10.1038/s41467-023-40459-8

Lobato-Peralta, D. R., et al. (2021). Comparison of lignin extraction processes: economic and environmental assessment. Journal of Cleaner Production, 293, 126123. https://doi.org/10.1016/j.jclepro.2021.126123 DOI: https://doi.org/10.1016/j.jclepro.2021.126123

Mostafavi, A., et al. (2024). Life-cycle and sustainability assessment for next-generation materials… Environmental Science & Technology. https://doi.org/10.1021/acs.est.4c08298 DOI: https://doi.org/10.1021/acs.est.4c08298

Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., et al. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 DOI: https://doi.org/10.1136/bmj.n71

Peppas, N. A., Huang, Y., Torres-Lugo, M., Ward, J. H., & Zhang, J. (2000). Physicochemical foundations and structural design of hydrogels in medicine and biology. Annual Review of Biomedical Engineering, 2, 9–29. https://doi.org/10.1146/annurev.bioeng.2.1.9 DOI: https://doi.org/10.1146/annurev.bioeng.2.1.9

Peters, J. T., Wechsler, M. E., & Peppas, N. A. (2021). Advanced biomedical hydrogels: molecular architecture and its impact on medical applications. Regenerative Biomaterials, 8(6), rbab060. https://doi.org/10.1093/rb/rbab060 DOI: https://doi.org/10.1093/rb/rbab060

Posoknistakul, P., et al. (2022). Preparation of light-colored lignin nanoparticles for broad-spectrum sunscreens. Polymers, 14(19), 4196. https://doi.org/10.3390/polym14194196 DOI: https://doi.org/10.3390/polym14194196

Qian, Y., Qiu, X., & Zhu, S. (2015). Lignin: A nature-inspired sun blocker for broad-spectrum sunscreens. Green Chemistry, 17, 320–324. https://doi.org/10.1039/C4GC01927C DOI: https://doi.org/10.1039/C4GC01333F

Rinaudo, M. (2008). Main properties and current applications of alginates. Progress in Polymer Science, 33(4), 397–422. https://doi.org/10.1016/j.progpolymsci.2007.11.002 DOI: https://doi.org/10.1016/j.progpolymsci.2007.11.002

Sadeghifar, H., & Ragauskas, A. J. (2020). Lignin as a UV light blocker—A review. Polymers, 12(5), 1134. https://doi.org/10.3390/polym12051134 DOI: https://doi.org/10.3390/polym12051134

Salminen, A., Kaarniranta, K., & Kauppinen, A. (2022). Photoaging: UV radiation-induced inflammation and immunosuppression accelerate the aging process in the skin. Inflammation Research, 71(7–8), 817–831. https://doi.org/10.1007/s00011-022-01598-8 DOI: https://doi.org/10.1007/s00011-022-01598-8

Sheldon, R. A. (2017). The E factor 25 years on: The rise of green chemistry and sustainability. Green Chemistry, 19(1), 18–43. https://doi.org/10.1039/C6GC02157C DOI: https://doi.org/10.1039/C6GC02157C

Siepmann, J., & Siepmann, F. (2012). Modeling of diffusion controlled drug delivery. Journal of Controlled Release, 161(2), 351–362. https://doi.org/10.1016/j.jconrel.2011.10.006 DOI: https://doi.org/10.1016/j.jconrel.2011.10.006

Sirviö, J. A., Visanko, M., & Liimatainen, H. (2016). Strong, self-standing lignin-containing nanocellulose composite films with UV blocking properties. ACS Sustainable Chemistry & Engineering, 4(10), 5335–5342. https://doi.org/10.1021/acssuschemeng.6b01591

Smidsrød, O. (1974). Molecular basis for some physical properties of alginates in the gel state. Faraday Discussions of the Chemical Society, 57, 263–274. https://doi.org/10.1039/DC9745700263 DOI: https://doi.org/10.1039/DC9745700263

Tran, M. H., Phan, D.-P., & Lee, E. Y. (2021). Review on lignin modifications toward natural UV protection ingredient for lignin-based sunscreens. Green Chemistry, 23(13), 4633–4646. https://doi.org/10.1039/D1GC01139A DOI: https://doi.org/10.1039/D1GC01139A

Wan, M., et al. (2025). From green synthesis to functional performance: PMI/E-factor-guided manufacturing of biomaterials… International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2025.141062 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141062

Wang, H., et al. (2024). Machine learning in biomaterials… Small Methods. https://doi.org/10.1002/smtd.202300553 DOI: https://doi.org/10.1002/smtd.202300553

Xing, Q., Ruch, D., Dubois, P., Wu, L., & Wang, W.-J. (2017). Biodegradable and high-performance poly(butylene adipate-co-terephthalate)–lignin UV-blocking films. ACS Sustainable Chemistry & Engineering, 5(11), 10342–10351. https://doi.org/10.1021/acssuschemeng.7b02370 DOI: https://doi.org/10.1021/acssuschemeng.7b02370

Yang, R., Gupta, A., & Zhao, B. (2024). Digital twins and AI-guided optimization of bio-based materials. ACS Applied Materials & Interfaces, 16(5), 6231–6245. https://doi.org/10.1021/acsami.3c18945

Yang, W., Fortunati, E., Gao, D., Balestra, G. M., Giovanale, G., He, X., Torre, L., Kenny, J. M., & Puglia, D. (2021). Valorization of lignin in polymer composites: A review. Composites Part B: Engineering, 215, 108833. https://doi.org/10.1016/j.compositesb.2021.108833 DOI: https://doi.org/10.1016/j.compositesb.2021.108833

Zevallos Torres, L. A., et al. (2020). Lignin as a potential source of high-added value compounds: A review. Journal of Cleaner Production, 263, 121499. https://doi.org/10.1016/j.jclepro.2020.121499 DOI: https://doi.org/10.1016/j.jclepro.2020.121499

Zhang, H., et al. (2023). Flexible and efficient UV-shielding composite films… lignin nanoparticles… Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.09.004 DOI: https://doi.org/10.1016/j.jmrt.2023.09.004

Zhang, X., Liu, W., Liu, W., & Qiu, X. (2020). High performance PVA/lignin nanocomposite films with excellent water vapor barrier and UV-shielding properties. International Journal of Biological Macromolecules, 142, 551–558. https://doi.org/10.1016/j.ijbiomac.2019.09.129 DOI: https://doi.org/10.1016/j.ijbiomac.2019.09.129

Zhang, Y., Wang, Y., Zhou, J., & Chen, X. (2020). Stabilization of bioactive compounds via nanoencapsulation: Mechanisms and applications. Food Hydrocolloids, 101, 105538. https://doi.org/10.1016/j.foodhyd.2019.105538 DOI: https://doi.org/10.1016/j.foodhyd.2019.105538

Standards and Regulatory Documents

ASTM International. (2016). Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials (ASTM G154-16). ASTM International. https://doi.org/10.1520/G0154-16 DOI: https://doi.org/10.1520/G0154-16

International Organization for Standardization. (2018). ISO 10993-1: Biological evaluation of medical devices—Part 1: Evaluation and testing within a risk management process. ISO. https://www.iso.org/standard/68936.html Typical reported endpoints include >80% cell viability in fibroblast assays and absence of hemolysis under ISO 10993‑5/‑4 screening, illustrating the need for architecture-controlled formulations to meet regulatory benchmarks.

U.S. Food and Drug Administration. (2023). Use of International Standard ISO 10993-1, “Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk management process” (Guidance). Typical reported endpoints include >80% cell viability in fibroblast assays and absence of hemolysis under ISO 10993‑5/‑4 screening, illustrating the need for architecture-controlled formulations to meet regulatory benchmarks.

U.S. Food and Drug Administration. (2026). 21 CFR § 878.4020—Occlusive wound dressing. Electronic Code of Federal Regulations. https://www.ecfr.gov/current/title-21/chapter-I/subchapter-H/part-878/subpart-E/section-878.4020

Published

2026-10-21

How to Cite

Souza, L. C. de, Alves, A. de M., Sarrouh, B., Santos, I. J. B., Cren, É. C., & Lofrano, R. C. Z. (2026). Architecture–Property–Function Relationships in Sustainable Polymer Biomaterials: A Critical Framework for Reproducible Green-by-Design Engineering. REMUNOM, 13(22), 1-40. https://doi.org/10.66104/rd2kd349

Similar Articles

1-10 of 50

You may also start an advanced similarity search for this article.