Relaciones entre arquitectura, propiedades y función en biomateriales poliméricos sostenibles: un marco crítico para una ingeniería verde por diseño reproducible
DOI:
https://doi.org/10.66104/rd2kd349Palabras clave:
polímero, hidrogel, nanoestructura, multiescala, difusión, propiedades ópticas, aprendizaje automáticoResumen
Esta revisión examina cómo la arquitectura jerárquica influye en el rendimiento multifuncional de los biomateriales poliméricos sostenibles, abordando una limitación persistente en el campo: el predominio de análisis centrados en la composición con una parametrización arquitectónica insuficiente. Para superar esta brecha, adoptamos un marco de Arquitectura–Propiedad–Función (APF), en el que los descriptores estructurales se tratan como variables primarias de diseño que vinculan la organización del material con el comportamiento mecánico, el transporte molecular, la atenuación óptica, la actividad redox y la respuesta biológica. Un análisis de la literatura guiado por PRISMA identificó 612 registros, de los cuales 94 estudios cumplieron los criterios de elegibilidad, que exigían una relación explícita entre al menos un descriptor arquitectónico y un resultado funcional mensurable. Dentro de este conjunto, se seleccionó un subconjunto específico de 26 conjuntos de datos emparejados dentro de los estudios para realizar una síntesis cuantitativa direccional basada en la comparabilidad y la calidad de los informes. En estos conjuntos de datos restringidos se observaron tendencias direccionalmente consistentes: el aumento de la densidad de reticulación iónica se asocia con un compromiso entre rigidez y transporte; la dispersión a nanoescala mejora la atenuación de la radiación UV normalizada por el espesor y estabiliza el rendimiento antioxidante; y el confinamiento molecular contribuye a una mayor estabilidad, al tiempo que modula el comportamiento de liberación. Sin embargo, estas relaciones dependen de las condiciones y varían según la calidad de los descriptores, las prácticas de normalización y las variables específicas de cada sistema. El análisis también identifica limitaciones críticas en la literatura, entre ellas la dependencia generalizada de descriptores indirectos, la comunicación inconsistente de los parámetros arquitectónicos y la integración limitada de métricas de sostenibilidad con criterios de valoración biológicos. Para abordar estos problemas, proponemos un marco estructurado de presentación de informes y un conjunto mínimo de descriptores para mejorar la reproducibilidad y permitir futuros enfoques basados en datos. En lugar de establecer reglas de diseño universalmente transferibles, esta revisión delimita tendencias arquitectónicas respaldadas por evidencias dentro de dominios de aplicabilidad definidos, al tiempo que expone explícitamente sus limitaciones y condiciones de validez. Esta perspectiva calibrada proporciona una base para una ingeniería más rigurosa, reproducible y, en última instancia, predictiva de biomateriales poliméricos sostenibles.Descargas
Referencias
Agrawal, A., & Choudhary, A. (2016). Perspective: Materials informatics and big data: Realization of the “fourth paradigm” of science in materials science. APL Materials, 4, 053208. https://doi.org/10.1063/1.4946894 DOI: https://doi.org/10.1063/1.4946894
Ahmed, E. M. (2015). Hydrogel: Preparation, characterization, and applications. Journal of Advanced Research, 6(2), 105–121. https://doi.org/10.1016/j.jare.2013.07.006 DOI: https://doi.org/10.1016/j.jare.2013.07.006
Alberts, A., Moldoveanu, E.-T., Niculescu, A.-G., & Grumezescu, A. M. (2025). Hydrogels for wound dressings: Applications in burn treatment and chronic wound care. Journal of Composites Science, 9(3), 133. https://doi.org/10.3390/jcs9030133 DOI: https://doi.org/10.3390/jcs9030133
Anastas, P. T., & Warner, J. C. (1998). Green chemistry: Theory and practice. Oxford University Press.
Annabi, N., Tamayol, A., Shin, S. R., Ghaemmaghami, A. M., Peppas, N. A., & Khademhosseini, A. (2014). Surgical materials: Current challenges and nano-enabled solutions. Tissue Engineering Part B: Reviews, 20(2), 1–18. https://doi.org/10.1089/ten.teb.2013.0403
Ansari, M., & Darvishi, A. (2024). A review of the current state of natural biomaterials in wound healing applications. Frontiers in Bioengineering and Biotechnology, 12, 1309541. https://doi.org/10.3389/fbioe.2024.1309541 DOI: https://doi.org/10.3389/fbioe.2024.1309541
Beisl, S., Miltner, A., & Friedl, A. (2017). Lignin from micro- to nanosize: Production methods. Chemical Communications, 53(92), 12390–12393. https://doi.org/10.1039/C7CC06002A
Boateng, J. S., Matthews, K. H., Stevens, H. N. E., & Eccleston, G. M. (2008). Wound healing dressings and drug delivery systems: A review. Journal of Pharmaceutical Sciences, 97(8), 2892–2923. https://doi.org/10.1002/jps.21210 DOI: https://doi.org/10.1002/jps.21210
Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O., & Walsh, A. (2018). Machine learning for molecular and materials science. Nature, 559, 547–555. https://doi.org/10.1038/s41586-018-0337-2 DOI: https://doi.org/10.1038/s41586-018-0337-2
Caló, E., & Khutoryanskiy, V. V. (2015). Biomedical applications of hydrogels: A review of patents and commercial products. European Polymer Journal, 65, 252–267. https://doi.org/10.1016/j.eurpolymj.2014.11.024 DOI: https://doi.org/10.1016/j.eurpolymj.2014.11.024
Chen, Y., Li, X., Zhang, S., & Wang, J. (2023). Machine learning–assisted design of sustainable polymer biomaterials. Advanced Functional Materials, 33(12), 2209876. https://doi.org/10.1002/adfm.202209876 DOI: https://doi.org/10.1002/adfm.202209876
Coogan, T. J., et al. (2025). Digital twin enabled polymer manufacturing… Polymer Journal. https://doi.org/10.1007/s40964-025-01257-4 DOI: https://doi.org/10.1007/s40964-025-01257-4
Cowen, L. M., et al. (2024). Machine learning for materials: opportunities and pitfalls… Next Materials. https://doi.org/10.1016/j.nxmate.2024.100449 DOI: https://doi.org/10.1016/j.nxmate.2024.100449
D'Orazio, J., Jarrett, S., Amaro-Ortiz, A., & Scott, T. (2013). UV radiation and the skin. International Journal of Molecular Sciences, 14(6), 12222–12248. https://doi.org/10.3390/ijms140612222 DOI: https://doi.org/10.3390/ijms140612222
Galvão, T. F., Pansani, T. S. A., & Harrad, D. (2022). A declaração PRISMA 2020: diretriz atualizada para relatar revisões sistemáticas. Epidemiologia e Serviços de Saúde, 31(2), e202201700033. https://doi.org/10.1590/s1679-49742022000200033 DOI: https://doi.org/10.1590/ss2237-9622202200011
Goliszek-Chabros, M., et al. (2025). Lignin nanoparticle-enhanced PVA foils for UVB/UVC protection. Scientific Reports. https://doi.org/10.1038/s41598-025-19753-6 DOI: https://doi.org/10.1038/s41598-025-19753-6
Grant, G. T., Morris, E. R., Rees, D. A., Smith, P. J. C., & Thom, D. (1973). Biological interactions between polysaccharides and divalent cations: The egg-box model. FEBS Letters, 32(1), 195–198. https://doi.org/10.1016/0014-5793(73)80770-7 DOI: https://doi.org/10.1016/0014-5793(73)80770-7
Gromkowska-Kępka, K. J., Puścion-Jakubik, A., Markiewicz-Żukowska, R., & Socha, K. (2020). The impact of ultraviolet radiation on skin photoaging—Review of in vitro studies. Journal of Cosmetic Dermatology, 19(8), 1964–1972. https://doi.org/10.1111/jocd.13411 DOI: https://doi.org/10.1111/jocd.13411
Hernández-González, A. C., Téllez-Jurado, L., & Rodríguez-Lorenzo, L. M. (2020). Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review. Carbohydrate Polymers, 229, 115514. https://doi.org/10.1016/j.carbpol.2019.115514 DOI: https://doi.org/10.1016/j.carbpol.2019.115514
Ho, T. T. P., Tran, H. A., Doan, V. K., Maitz, J., Li, Z., Wise, S. G., Lim, K. S., & Rnjak-Kovacina, J. (2024). Natural polymer-based materials for wound healing applications. Advanced NanoBiomed Research, 4(5), 2300131. https://doi.org/10.1002/anbr.202300131 DOI: https://doi.org/10.1002/anbr.202300131
Kai, D., Tan, M. J., Chee, P. L., Chua, Y. K., Yap, Y. L., & Loh, X. J. (2016). Towards lignin-based functional materials in a sustainable world. Green Chemistry, 18, 1175–1200. https://doi.org/10.1039/C5GC02616D DOI: https://doi.org/10.1039/C5GC02616D
Lamberti, G., et al. (2020). Life cycle assessment in polymeric systems: methods and applications. Polymers, 12(6), 1212. https://doi.org/10.3390/polym12061212 DOI: https://doi.org/10.3390/polym12061212
Lee, K. Y., & Mooney, D. J. (2012). Alginate: Properties and biomedical applications. Progress in Polymer Science, 37(1), 106–126. https://doi.org/10.1016/j.progpolymsci.2011.06.003 DOI: https://doi.org/10.1016/j.progpolymsci.2011.06.003
Li, J., & Mooney, D. J. (2016). Designing hydrogels for controlled drug delivery. Nature Reviews Materials, 1, 16071. https://doi.org/10.1038/natrevmats.2016.71 DOI: https://doi.org/10.1038/natrevmats.2016.71
Li, X., et al. (2022). Functional biomaterials (editorial/overview de “functional design” útil como framing). APL Bioengineering, 6(1), 010401. https://doi.org/10.1063/5.0078930 DOI: https://doi.org/10.1063/5.0078930
Liang, T., Ma, Y., Jiang, Z., et al. (2024). New insights into greener skin healthcare protection: lignin nanoparticles as additives to develop natural-based sunscreens with high UV protection. Carbon Resources Conversion, 7(4), 100227. https://doi.org/10.1016/j.crcon.2024.100227 DOI: https://doi.org/10.1016/j.crcon.2024.100227
Liu, R., et al. (2023). Applied machine learning as a driver for polymeric biomaterials design. Nature Communications. https://doi.org/10.1038/s41467-023-40459-8 DOI: https://doi.org/10.1038/s41467-023-40459-8
Lobato-Peralta, D. R., et al. (2021). Comparison of lignin extraction processes: economic and environmental assessment. Journal of Cleaner Production, 293, 126123. https://doi.org/10.1016/j.jclepro.2021.126123 DOI: https://doi.org/10.1016/j.jclepro.2021.126123
Mostafavi, A., et al. (2024). Life-cycle and sustainability assessment for next-generation materials… Environmental Science & Technology. https://doi.org/10.1021/acs.est.4c08298 DOI: https://doi.org/10.1021/acs.est.4c08298
Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., et al. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71 DOI: https://doi.org/10.1136/bmj.n71
Peppas, N. A., Huang, Y., Torres-Lugo, M., Ward, J. H., & Zhang, J. (2000). Physicochemical foundations and structural design of hydrogels in medicine and biology. Annual Review of Biomedical Engineering, 2, 9–29. https://doi.org/10.1146/annurev.bioeng.2.1.9 DOI: https://doi.org/10.1146/annurev.bioeng.2.1.9
Peters, J. T., Wechsler, M. E., & Peppas, N. A. (2021). Advanced biomedical hydrogels: molecular architecture and its impact on medical applications. Regenerative Biomaterials, 8(6), rbab060. https://doi.org/10.1093/rb/rbab060 DOI: https://doi.org/10.1093/rb/rbab060
Posoknistakul, P., et al. (2022). Preparation of light-colored lignin nanoparticles for broad-spectrum sunscreens. Polymers, 14(19), 4196. https://doi.org/10.3390/polym14194196 DOI: https://doi.org/10.3390/polym14194196
Qian, Y., Qiu, X., & Zhu, S. (2015). Lignin: A nature-inspired sun blocker for broad-spectrum sunscreens. Green Chemistry, 17, 320–324. https://doi.org/10.1039/C4GC01927C DOI: https://doi.org/10.1039/C4GC01333F
Rinaudo, M. (2008). Main properties and current applications of alginates. Progress in Polymer Science, 33(4), 397–422. https://doi.org/10.1016/j.progpolymsci.2007.11.002 DOI: https://doi.org/10.1016/j.progpolymsci.2007.11.002
Sadeghifar, H., & Ragauskas, A. J. (2020). Lignin as a UV light blocker—A review. Polymers, 12(5), 1134. https://doi.org/10.3390/polym12051134 DOI: https://doi.org/10.3390/polym12051134
Salminen, A., Kaarniranta, K., & Kauppinen, A. (2022). Photoaging: UV radiation-induced inflammation and immunosuppression accelerate the aging process in the skin. Inflammation Research, 71(7–8), 817–831. https://doi.org/10.1007/s00011-022-01598-8 DOI: https://doi.org/10.1007/s00011-022-01598-8
Sheldon, R. A. (2017). The E factor 25 years on: The rise of green chemistry and sustainability. Green Chemistry, 19(1), 18–43. https://doi.org/10.1039/C6GC02157C DOI: https://doi.org/10.1039/C6GC02157C
Siepmann, J., & Siepmann, F. (2012). Modeling of diffusion controlled drug delivery. Journal of Controlled Release, 161(2), 351–362. https://doi.org/10.1016/j.jconrel.2011.10.006 DOI: https://doi.org/10.1016/j.jconrel.2011.10.006
Sirviö, J. A., Visanko, M., & Liimatainen, H. (2016). Strong, self-standing lignin-containing nanocellulose composite films with UV blocking properties. ACS Sustainable Chemistry & Engineering, 4(10), 5335–5342. https://doi.org/10.1021/acssuschemeng.6b01591
Smidsrød, O. (1974). Molecular basis for some physical properties of alginates in the gel state. Faraday Discussions of the Chemical Society, 57, 263–274. https://doi.org/10.1039/DC9745700263 DOI: https://doi.org/10.1039/DC9745700263
Tran, M. H., Phan, D.-P., & Lee, E. Y. (2021). Review on lignin modifications toward natural UV protection ingredient for lignin-based sunscreens. Green Chemistry, 23(13), 4633–4646. https://doi.org/10.1039/D1GC01139A DOI: https://doi.org/10.1039/D1GC01139A
Wan, M., et al. (2025). From green synthesis to functional performance: PMI/E-factor-guided manufacturing of biomaterials… International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2025.141062 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141062
Wang, H., et al. (2024). Machine learning in biomaterials… Small Methods. https://doi.org/10.1002/smtd.202300553 DOI: https://doi.org/10.1002/smtd.202300553
Xing, Q., Ruch, D., Dubois, P., Wu, L., & Wang, W.-J. (2017). Biodegradable and high-performance poly(butylene adipate-co-terephthalate)–lignin UV-blocking films. ACS Sustainable Chemistry & Engineering, 5(11), 10342–10351. https://doi.org/10.1021/acssuschemeng.7b02370 DOI: https://doi.org/10.1021/acssuschemeng.7b02370
Yang, R., Gupta, A., & Zhao, B. (2024). Digital twins and AI-guided optimization of bio-based materials. ACS Applied Materials & Interfaces, 16(5), 6231–6245. https://doi.org/10.1021/acsami.3c18945
Yang, W., Fortunati, E., Gao, D., Balestra, G. M., Giovanale, G., He, X., Torre, L., Kenny, J. M., & Puglia, D. (2021). Valorization of lignin in polymer composites: A review. Composites Part B: Engineering, 215, 108833. https://doi.org/10.1016/j.compositesb.2021.108833 DOI: https://doi.org/10.1016/j.compositesb.2021.108833
Zevallos Torres, L. A., et al. (2020). Lignin as a potential source of high-added value compounds: A review. Journal of Cleaner Production, 263, 121499. https://doi.org/10.1016/j.jclepro.2020.121499 DOI: https://doi.org/10.1016/j.jclepro.2020.121499
Zhang, H., et al. (2023). Flexible and efficient UV-shielding composite films… lignin nanoparticles… Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.09.004 DOI: https://doi.org/10.1016/j.jmrt.2023.09.004
Zhang, X., Liu, W., Liu, W., & Qiu, X. (2020). High performance PVA/lignin nanocomposite films with excellent water vapor barrier and UV-shielding properties. International Journal of Biological Macromolecules, 142, 551–558. https://doi.org/10.1016/j.ijbiomac.2019.09.129 DOI: https://doi.org/10.1016/j.ijbiomac.2019.09.129
Zhang, Y., Wang, Y., Zhou, J., & Chen, X. (2020). Stabilization of bioactive compounds via nanoencapsulation: Mechanisms and applications. Food Hydrocolloids, 101, 105538. https://doi.org/10.1016/j.foodhyd.2019.105538 DOI: https://doi.org/10.1016/j.foodhyd.2019.105538
Standards and Regulatory Documents
ASTM International. (2016). Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials (ASTM G154-16). ASTM International. https://doi.org/10.1520/G0154-16 DOI: https://doi.org/10.1520/G0154-16
International Organization for Standardization. (2018). ISO 10993-1: Biological evaluation of medical devices—Part 1: Evaluation and testing within a risk management process. ISO. https://www.iso.org/standard/68936.html Typical reported endpoints include >80% cell viability in fibroblast assays and absence of hemolysis under ISO 10993‑5/‑4 screening, illustrating the need for architecture-controlled formulations to meet regulatory benchmarks.
U.S. Food and Drug Administration. (2023). Use of International Standard ISO 10993-1, “Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk management process” (Guidance). Typical reported endpoints include >80% cell viability in fibroblast assays and absence of hemolysis under ISO 10993‑5/‑4 screening, illustrating the need for architecture-controlled formulations to meet regulatory benchmarks.
U.S. Food and Drug Administration. (2026). 21 CFR § 878.4020—Occlusive wound dressing. Electronic Code of Federal Regulations. https://www.ecfr.gov/current/title-21/chapter-I/subchapter-H/part-878/subpart-E/section-878.4020
Descargas
Publicado
Número
Sección
Licencia
Derechos de autor 2026 Luana Costa de Souza, Ariene de Morais Alves, Boutros Sarrouh, Igor José Boggione Santos, Érika Cristina Cren, Renata Carolina Zanetti Lofrano

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Authors who publish in this journal agree to the following terms:
Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution License, which permits the sharing of the work with proper acknowledgment of authorship and initial publication in this journal;
Authors are authorized to enter into separate, additional agreements for the non-exclusive distribution of the version of the work published in this journal (e.g., posting in an institutional repository or publishing it as a book chapter), provided that authorship and initial publication in this journal are properly acknowledged, and that the work is adapted to the template of the respective repository;
Authors are permitted and encouraged to post and distribute their work online (e.g., in institutional repositories or on their personal websites) at any point before or during the editorial process, as this may lead to productive exchanges and increase the impact and citation of the published work (see The Effect of Open Access);
Authors are responsible for correctly providing their personal information, including name, keywords, abstracts, and other relevant data, thereby defining how they wish to be cited. The journal’s editorial board is not responsible for any errors or inconsistencies in these records.
PRIVACY POLICY
The names and email addresses provided to this journal will be used exclusively for the purposes of this publication and will not be made available for any other purpose or to third parties.
Note: All content of the work is the sole responsibility of the author and the advisor.
