The Main Challenges in Standardizing Logistics Procedures in an Organization from the Amazon Region
DOI:
https://doi.org/10.66104/qwanbz86Keywords:
Standardization, Logistics procedures, Standardization difficulties, Consequences of lack of standardization, Reasons for lack of standardsAbstract
Standardization represents an organizational effort to rationalize procedures to achieve efficiency, effectiveness, and productivity gains. This project aims to describe the formalization difficulties faced by an Amazonian organization in standardizing its logistics procedures. The survey method was used, with data collected through a semi-structured interview script with logistics professionals and the organization's managers, analyzed using semantic analysis techniques and organized in synthesis tables, with results generated from content analysis and interpreted comparatively with the theoretical reference framework prepared for the research. The results showed a) seven reasons for non-standardization, b) the difficulties for standardization are the high demand for activities, lack of physical space, low interest in investments and the need for trained employees, c) difficulties exist due to task overload, lack of interest from leadership and low complexity of activities; and d) the consequences of non-standardization are the direct compromise of the quality and performance of logistics procedures. The conclusion shows that the lack of formalization is not only due to technical limitations, but also to management's mistaken perception of the simplicity of processes, which results in a chronic lack of priority and investment in training and technology. The main contribution of the study to science is to demonstrate that the lack of standardization is not only a technical problem, but also a managerial and cultural phenomenon.Downloads
References
ABBASOV, N. Criteria for assessing the quality of forensic activities in different countries of the world. Law. Human. Environment, v. 13, n. 3, p. 7-16, 2022. https://doi.org/10.31548/law2022.03.001. DOI: https://doi.org/10.31548/law2022.03.001
AGUSTINI, N. L. P. I. B. et al. Simulation in nursing education: A narrative review of strategies, outcomes, and challenges. Adi Husada Nursing Journal, v. 11, n. 1, p. 17-25, 2025. https://doi.org/10.37036/ahnj.v11i1.622. DOI: https://doi.org/10.37036/ahnj.v11i1.622
ALMEIDA, A. S. et al. The operational steps of the evaluation processes: a balance of the literature. Research, Society and Development, v. 11, n. 12, p; 1-18, 2022. https://doi.org/10.33448/rsd-v11i12.34288. DOI: https://doi.org/10.33448/rsd-v11i12.34288
Berrio, S. et al. Ergonomic factors affecting comprehension levels of traffic signs: A critical review. International Journal of Transportation Science and Technology, v. 12, n. 3, p. 848-861, 2023. https://doi.org/10.1016/j.ijtst.2022.08.004. DOI: https://doi.org/10.1016/j.ijtst.2022.08.004
BLANCAS, F. J.; CONTRERAS, I. Global SDG composite indicator: A new methodological proposal that combines compensatory and non‐compensatory aggregations. Sustainable Development, v. 33, n. 1, p. 158-176, 2025. https://doi.org/10.1002/sd.3109. DOI: https://doi.org/10.1002/sd.3109
BRITO, Z. M. et al. Processo gerencial: uma análise para suporte à gestão em uma instituição federal de ensino. In: XVI Coloquio Internacional de Gestión Universitaria, Arequipa, Perú, 23-25 de noviembre de 2016. https://doi.org/10.5281/zenodo.17143172.
CHUNYAN, W.; JING, L.; HANFANG, H. A preliminary research on standardization service mode for small-and-medium-sized enterprises. In Proceedings of the 2020 11th International Conference on E-business, Management and Economics, p. 243-246, 2020. https://doi.org/10.1145/3414752.341475. DOI: https://doi.org/10.1145/3414752.3414755
DAMOISEAUX, J. ANCA testing in clinical practice: from implementation to quality control and harmonization. Frontiers in Immunology, v. 12, p. 656796, 2021. https://doi.org/10.3389/fimmu.2021.656796. DOI: https://doi.org/10.3389/fimmu.2021.656796
DHANWADE, S.; HUDDAR, S.; KUMAR, E. A. Application of hyphenation techniques in herbal drug standardisation. World Journal of Pharmaceutical Research, 1v. 3, n. 1, p. 3121-3129, 2023. https://doi.org/10.20959/wjpr20241-31179.
DLAMINI, N.; OLANREWAJU, O. A. An investigation into campus safety and security. In Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management, Singapore, March 7-11, p. 7-11, 2021. DOI: https://doi.org/10.46254/AN11.20210045
FRAGKEDAKI, K. et al. Comparative analysis of GAT and BERT for human-like playtesting. In 2025 IEEE Conference on Games (CoG). IEEE, Lisbon, Portugal, 26-29 August, p. 1-8, 2025. 10.1109/CoG64752.2025.11114390 DOI: https://doi.org/10.1109/CoG64752.2025.11114390
FURUYA, H.; HOSODA, T.; MATSUO, T. A Study on a new framework for the influence of time constraints on decision making. IIAI Letters on Business and Decision Science, v. 5, p. 1-12, 2025. https://doi.org/10.52731/lbds.v005.367. DOI: https://doi.org/10.52731/lbds.v005.367
GE, F. et al. The spatial differentiation characteristics of the residential environment quality in Northern Chinese cities: based on a new evaluation framework. Sustainability, v. 17, n. 16, p. 7473, 2025. https://doi.org/10.3390/su17167473. DOI: https://doi.org/10.3390/su17167473
GIYANTI, I. L.; OKTAVIYANTHI, R. Integration of item response theory in the development of PhET-based graphing lines worksheets for optimizing student algebra competence. Jurnal Elemen, v. 11, n. 1, p. 153-170, 2025. https://doi.org/10.29408/jel.v11i1.27634. DOI: https://doi.org/10.29408/jel.v11i1.27634
GOEL, K.; BANDARA, W.; GABLE, G. Conceptualizing business process standardization: a review and synthesis. Schmalenbach Journal of Business Research, v. 75, n. 2, p. 195-237, 2023. https://doi.org/10.1007/s41471-023-00158-y. DOI: https://doi.org/10.1007/s41471-023-00158-y
GONG, Y. et al. A survey on dataset quality in machine learning. Information and Software Technology, v. 162, p. 107268, 2023. https://doi.org/10.1016/j.infsof.2023.107268 DOI: https://doi.org/10.1016/j.infsof.2023.107268
HADID, K. I.; SOON, N. K.; AMREEGHAH, A. A. E. The effect of digital banking service quality on customer satisfaction: A case study on the Malaysian banks. Asian Journal of Applied Science and Technology, 4(01), 06-29, 2020. Available at https://ajast.net/data/uploads/22122.pdf. DOI: https://doi.org/10.38177/AJAST.2020.4102
Hălălișan, A. F. et al. The relationships between forestry sector standardization, market evolution and sustainability approaches in the communist and post-communist economies: The case of Romania. Notulae Botanicae Horti Agrobotanici Cluj-Napoca, v. 48, n. 3, p. 1683-1698, 2020. https://doi.org/10.15835/nbha48312007. DOI: https://doi.org/10.15835/nbha48312007
HARSONO, I.; NASUTION, M. Implementation of customer journey mapping in Indonesia’s tourism industry to enhance tourist satisfaction. The Eastasouth Management and Business, v. 3, n. 3, p. 529-536, 2025. https://doi.org/10.58812/esmb.v3i03.560. DOI: https://doi.org/10.58812/esmb.v3i03.560
HASSAN, S. M.Circular economy and ESG: Building sustainable business models in the manufacturing sector. J. Bus. Econ. Stud, v. 2, p. 1-12, 2025. https://doi.org/10.61440/JBES.2025.v2.50. DOI: https://doi.org/10.61440/JBES.2025.v2.50
HOSSAIN, M. S. et al. (2025). Unravelling the nexus between antecedents of customer satisfaction and innovative service acceptance in restaurants. Journal of Culinary Science & Technology, v. 23, n. 4, p. 799-819. https://doi.org/10.1080/15428052.2024.2345311. DOI: https://doi.org/10.1080/15428052.2024.2345311
JASWIR, I. et al. Motives for participation in halal food standard implementation: an empirical study in Malaysian halal food industry. International Journal of Islamic and Middle Eastern Finance and Management, v. 16, n. 5, p. 928-954, 2023. https://doi.org/10.1108/IMEFM-07-2021-0264. DOI: https://doi.org/10.1108/IMEFM-07-2021-0264
KAJLA, T. et al. Identification and prioritization of the factors influencing blockchain adoption in the banking sector: integrating fuzzy AHP with TOE framework. International Journal of Quality & Reliability Management, v. 41, n. 8, p. 2004-2026, 2024. https://doi.org/10.1108/IJQRM-03-2023-0079. DOI: https://doi.org/10.1108/IJQRM-03-2023-0079
KANG, A. D. C.; ASNUR, L. Standardization of virgin mojito mocktail beverages in Sebungkus Indonesia. Journal of Multidimensional Management, v. 2, n. 3, p. 303-307, 2025. https://doi.org/10.63076/jomm.v2i3.61. DOI: https://doi.org/10.63076/jomm.v2i3.61
KEHOE, E. R. et al. Biomarker selection and a prospective metabolite-based machine learning diagnostic for Lyme disease. Scientific Reports, v. 12, n. 1, p. 1478, 2022. https://doi.org/10.1038/s41598-022-05451-0. DOI: https://doi.org/10.1038/s41598-022-05451-0
KHANAM, N. N. Role of standardized patients in medical education. Bangladesh Journal of Obstetrics & Gynaecology, v. 36, n. 2, p. 126-131, 2021. https://doi.org/10.3329/bjog.v36i2.68621.
KIM, S. Y.; KIM, J. The impact of AI recommendation quality on service satisfaction: the moderating roles of standardization and customization. Journal of Services Marketing, v. 39, n. 4, p. 365-386, 2025. https://doi.org/10.1108/JSM-05-2024-0214. DOI: https://doi.org/10.1108/JSM-05-2024-0214
LUBIS, M.; ANANZA, H. H. R.; SURYOPUTRO, F. D. Analysis and design of policy and standard operating procedure (SOP) for information technology in the communication and information services department. In 2020 6th International Conference on Interactive Digital Media (ICIDM), IEEE, Bandung, Indonesia, December 14-15, p. pp. 1-7, 2020. https://doi.org/10.1109/ICIDM51048.2020.9339659 DOI: https://doi.org/10.1109/ICIDM51048.2020.9339659
MIGNACCA, B. et al. Building circular economy theories: A practical-oriented perspective and a way forward. Journal of Industrial Ecology, v. 29, n. 2, p. 418-428, 2025. https://doi.org/10.1111/jiec.13622. DOI: https://doi.org/10.1111/jiec.13622
MOHAMED, T. H. et al. Diuretic therapy and acute kidney injury in preterm neonates and infants. Pediatric Nephrology, v. 36, n. 12, p. 3981-3991, 2021. https://doi.org/10.1007/s00467-021-05132-6. DOI: https://doi.org/10.1007/s00467-021-05132-6
MORA, A. C.; MACE, C. R. Standardization of microsampling technologies for accurate sensing and reliable diagnostics. ACS Sensors, v. 1, n. 6, p. 3795-3805, 2025. https://doi.org/10.1021/acssensors.5c00667. DOI: https://doi.org/10.1021/acssensors.5c00667
SILVA, D. N. et al. (2013). Proposição de uma sistemática de avaliação de aprendizagem na formação de administradores com base no processo gerencial. Revista de Administração da Universidade Federal de Santa Maria, v. 6, n. 4, p. 640-657. https://doi.org/10.5902/198346595826. DOI: https://doi.org/10.5902/198346595826
NASCIMENTO-E-SILVA, D. Gestão de organizações de ciência e tecnologia: microensaios sobre a prática do processo gerencial. Saarbrücken: Novas Edições Acadêmicas, 2016.
NASCIMENTO-E-SILVA, D. Manual do método científico-tecnológico: edição sintética. Florianópolis: DNS Editor, 2020.
NASCIMENTO-E-SILVA, D. (2021a). Handbook of the scientific-technological method: Synthetic edition. Manaus: DNS Editor.
NASCIMENTO-E-SILVA, D. (2021b). O método científico-tecnológico: questões de pesquisa. Manaus: DNS Editor.
NASCIMENTO-E-SILVA, D. (2023). O método científico-tecnológico: coleta de dados. Manaus: DNS Editor.
NASCIMENTO-E-SILVA, D. (2026). O método científico-tecnológico: organização de dados. Manaus: DNS Editor.
NASCIMENTO-E-SILVA, D., SOUSA JÚNIOR, E. B.; SOARES, A. L. Influence of the external environment on the logistics strategies of industrial organizations. International Journal for Innovation Education and Research, v. 7, n. 12, p. 628-643, 2019. https://doi.org/10.31686/ijier.Vol7.Iss12.2117. DOI: https://doi.org/10.31686/ijier.vol7.iss12.2117
NEETHIRAJAN, G. Niosome-based approaches in ocular drug delivery: Advances, challenges, and future perspectives. Journal of Pharmaceutical Research and Integrated Medical Sciences, p. 135-149, 2025. https://doi.org/10.64063/3049-1681.vol.2.issue9.12. DOI: https://doi.org/10.64063/3049-1681.vol.2.issue9.12
NYITRAI, N. et al. Face validity of a new aquatic skill assessment tool: RAEE (refuse, assist, effective, efficient). International Journal of Sports Science & Coaching, v. 20, n. 4, p. 1683-1692, 2025. https://doi.org/10.1177/17479541251334018. DOI: https://doi.org/10.1177/17479541251334018
NYQVIST, R. et al. Building the digital age: management of digital transformation in the construction industry. Construction Management and Economics, v. 43, n. 4, p. 262-283, 2025. https://doi.org/10.1080/01446193.2024.2416033. DOI: https://doi.org/10.1080/01446193.2024.2416033
PAINTER, J. L.; RAMCHARRAN, D.; BATE, A. Perspective review: Will generative AI make common data models obsolete in future analyses of distributed data networks? Therapeutic Advances in Drug Safety, v. 16, p. 1-17, 2025. https://doi.org/10.1177/20420986251332743. DOI: https://doi.org/10.1177/20420986251332743
PAPAMICHAEL, I. et al. Measuring circularity: tools for monitoring a smooth transition to circular economy. Sustainable Chemistry and Pharmacy, v. 36, p. 101330, 2023. https://doi.org/10.1016/j.scp.2023.101330. DOI: https://doi.org/10.1016/j.scp.2023.101330
PAREDES CHIRINOS, X. N.; CABALLERO CARPIO, N. M.; QUIROZ-FLORES, J. C. Implementation of an agile receivables management model using Kanban to reduce delinquency rates in digital transformation consultancies. Proceedings of the International Conference on Industrial Engineering and Operations Management; 9th North American Conference on Industrial Engineering and Operations Management, Washington D.C., USA, June 4-6, 2024, https://doi.org/10.46254/NA09.20240184. DOI: https://doi.org/10.46254/NA09.20240184
PERRI, G. et al. Intraoperative blood loss estimation in hepato-pancreato-biliary surgery—relevant, not reported, not standardized: results from a systematic review and a worldwide snapshot survey. Annals of Surgery, v. 277, n. 4, p. e849-e855, 2023. https://doi.org/10.1097/SLA.0000000000005536. DOI: https://doi.org/10.1097/SLA.0000000000005536
Pund, A. R. et al. A review on recent trends in herbal medicine. International Journal of Creative Research Thoughts, v. 10, n. 12, p. a186-a193, 2022. Available at https://ijcrt.org/viewfull.php?&p_id=IJCRT2212023.
REGE, M. R.; HANDZISKI, V.; WOLISZ, A. Generation of realistic cloud access times for mobile application testing using transfer learning. Computer Communications, v. 172, p. 196-215, 2021. https://doi.org/10.1016/j.comcom.2021.03.010. DOI: https://doi.org/10.1016/j.comcom.2021.03.010
REZENDE, É. G.; ROCO, F. B. O.; COSTA MELO, I. Change management in a pet food plant: a user-centric phenomenological approach for a digital transition. In SILVA, F.J.G. et al. (Eds.). International conference on flexible automation and intelligent manufacturing. Cham: Springer Nature, 2023, p. 621- 628. https://doi.org/10.1007/978-3-031-38165-2_72. DOI: https://doi.org/10.1007/978-3-031-38165-2_72
SALMAN, O. S. ; KLEIN, R. Developing an automatic cooperating neural networks and image standardization approach for segmentation of X-ray computed tomography images. In Proceedings of the Future Technologies Conference (FTC) 2020, v. 1, p. 390-401, 2021. https://doi.org/10.1007/978-3-030-63128-4_29. DOI: https://doi.org/10.1007/978-3-030-63128-4_29
SARAVANAN, J.; RAO, P. V.; DURAI, N. P. A case-based sustainability assessment of tannery sludge management technique: Lab to market perspective. Materials Circular Economy, v. 7, n. 1, p. 22, 2025. https://doi.org/10.1007/s42824-025-00180-x. DOI: https://doi.org/10.1007/s42824-025-00180-x
SILVA, R. O. et al. (2021). Undergraduate coordinator: competences required according to management principles. Revista de Gestão e Avaliação Educacional, v. 10, n. 19, p. 1-17. http://dx.doi.org/10.5902/2318133863666. DOI: https://doi.org/10.5902/2318133863666
TANG, X.; BIAN, L. The cognition of standards and standardization concepts and reflection on standardization work of traditional Chinese medicine specialty. Guidelines and Standards in Chinese Medicine, v. 2, n. 1, p. 2-6, 2024. https://doi.org/10.1097/gscm.0000000000000015. DOI: https://doi.org/10.1097/gscm.0000000000000015
TSOEU, M. et al. Engineering, the profession in trouble: Lack of programme development standards that support the AI Chatbot? A system view. In 2023 World Engineering Education Forum-Global Engineering Deans Council (WEEF-GEDC). IEEE, Monterrey, Mexico, October 23-27, p. 1-6, 2023. https://doi.org/10.1109/WEEF-GEDC59520.2023.10343985. DOI: https://doi.org/10.1109/WEEF-GEDC59520.2023.10343985
TSOPRA, R. et al. A framework for validating AI in precision medicine: considerations from the European ITFoC consortium. BMC Medical Informatics and Decision Making, v. 21, p. 1-14, 2021. https://doi.org/10.1186/s12911-021-01634-3. DOI: https://doi.org/10.1186/s12911-021-01634-3
UÇAR, Y. A Comprehensive review of the concept of psychological climate and suggestions for creating a positive psychological climate. Premium e-Journal of Social Sciences (PEJOSS), v. 9, n. 57, p. 862-884, 2025. https://doi.org/10.5281/zenodo.17032034
WANG, P. Research on the influencing factors of performance management innovation in inspection institutions on enterprise standardization construction. Proceedings of Business and Economic Studies, v. 3, n. 1, p. 6-14, 2020. https://doi.org/10.26689/pbes.v3i1.1074. DOI: https://doi.org/10.26689/pbes.v3i1.1074
WEIAND, D. D.; ABREU, J. L.; PIRAN, F. A. S. Proposição de um modelo de gerenciamento do sistema produtivo para indústrias alimentícias com processo de beneficiamento de matéria prima. Latin American Journal of Business Management, v. 13, n. 2, p. 45-57, 2022. Available at https://www.lajbm.com.br/journal/article/view/687.
WOLDEYOHANNES, B.; GAYNOR, M.; ASSEFA, T. Exploring institutional logics to dynamic ambidexterity in health information system implementation in the public health sector of Ethiopia. The Electronic Journal of Information Systems in Developing Countries, v. 89, n. 3, p. e12252, 2023. https://doi.org/10.1002/isd2.12252. DOI: https://doi.org/10.1002/isd2.12252
ZHANG, J. et al. Pedestrian attitude estimation and recognition algorithm based on RF data. Wireless Communications and Mobile Computing, v. 2022, n. 1, p. 1295853, 2022. hhttps://doi.org/10.1155/2022/1295853. DOI: https://doi.org/10.1155/2022/1295853
ZNAD, J. H.; KHALEEL, A. M.; KADHIM, B. S. The impact of concurrent engineering on the operational performance of industrial organizations: Case study in Al-Zawra General Company. Multicultural Education, v. 6, n. 5, p. 41-52, 2020. https://doi.org/10.5281/zenodo.4302197.
ZULKIFLI, A.; RADIAH SHARIFF, S. S. Factors influencing staff complying with SOP: a study at road transport department (RTD) Kota Bharu, Kelantan. Malaysian Journal of Computing (MJoC), v. 8, n. 2, p. 1482-1494, 2023. https://doi.org/10.24191/mjoc.v8i2.20492. DOI: https://doi.org/10.24191/mjoc.v8i2.20492
Published
Issue
Section
License
Copyright (c) 2026 Samuel Lima Rozendo, Gilbert Breves Martins, Marison Luiz Soares, Alexandre Jorge Gaia Cardoso, Daniel Nascimento-e-Silva

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish in this journal agree to the following terms:
Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution License, which permits the sharing of the work with proper acknowledgment of authorship and initial publication in this journal;
Authors are authorized to enter into separate, additional agreements for the non-exclusive distribution of the version of the work published in this journal (e.g., posting in an institutional repository or publishing it as a book chapter), provided that authorship and initial publication in this journal are properly acknowledged, and that the work is adapted to the template of the respective repository;
Authors are permitted and encouraged to post and distribute their work online (e.g., in institutional repositories or on their personal websites) at any point before or during the editorial process, as this may lead to productive exchanges and increase the impact and citation of the published work (see The Effect of Open Access);
Authors are responsible for correctly providing their personal information, including name, keywords, abstracts, and other relevant data, thereby defining how they wish to be cited. The journal’s editorial board is not responsible for any errors or inconsistencies in these records.
PRIVACY POLICY
The names and email addresses provided to this journal will be used exclusively for the purposes of this publication and will not be made available for any other purpose or to third parties.
Note: All content of the work is the sole responsibility of the author and the advisor.
