Influence of the Partial Replacement of Natural Coarse Aggregate with Blast Furnace Slag on the Mechanical Properties of Concrete
DOI:
https://doi.org/10.66104/vr6qrr64Keywords:
Concrete, Blast furnace slag, Coarse aggregate, Industrial waste, Mechanical propertiesAbstract
The use of industrial waste as alternative materials in civil construction represents a strategy to reduce the exploitation of natural resources and provide an appropriate destination for industrial by-products. In this context, this study evaluated the mechanical behavior of concrete produced with partial replacement of natural coarse aggregate by blast furnace slag (BFS) generated from charcoal-based pig iron production. Concrete mixtures were produced with 0%, 20%, 30%, and 40% replacement, by mass, of natural coarse aggregate with BFS, maintaining a water-to-cement ratio of 0.64. The concretes were evaluated at 28 and 63 days for axial compressive strength, splitting tensile strength, and modulus of elasticity. The slag presented physical characteristics suitable for use as coarse aggregate, particularly its rough texture, irregular shape, and low surface wear. At 28 days, concretes containing 30% and 40% BFS showed a significant increase in the evaluated mechanical properties compared with the reference concrete, whereas the 20% replacement presented behavior similar to that of conventional concrete. At 63 days, the concrete containing 40% BFS presented the highest values of compressive strength, splitting tensile strength, and modulus of elasticity. The results indicate that partial replacement of natural coarse aggregate with BFS, particularly at replacement levels of 30% and 40%, provided technically satisfactory mechanical performance, demonstrating potential for application in concrete production while contributing to industrial waste utilization and reducing the consumption of natural aggregates.Downloads
References
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Concreto – Ensaios de compressão de corpos de prova cilíndricos – Método de ensaio. NBR 5739. Rio de Janeiro. 2007.
ASSSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Concreto e argamassa – Determinação da resistência à tração por compressão diametral de corpos de prova cilíndricos. NBR 7222. Rio de Janeiro. 2011.
ASSSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Concreto - Determinação dos módulos estáticos de elasticidade e de deformação à compressão. NBR 8522. Rio de Janeiro. 2008.
ASSSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Concreto – Projeto de estruturas de concreto. NBR 6118. Rio de Janeiro. 2014.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Agregados – Determinação da composição granulométrica. NBR NM 248. Rio de Janeiro. 2003.
ASSSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Agregado – Determinação da massa unitária e dos espaços vazios. NBR NM 45. Rio de Janeiro. 2006.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Agregado miúdo – Determinação da massa específica e massa específica aparente. NBR NM 52. Rio de Janeiro. 2009.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Agregado graúdo – Determinação da massa específica e massa específica aparente. NBR NM 53. Rio de Janeiro. 2009.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Agregados para concreto – Especificação. NBR 7211. Rio de Janeiro. 2009.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Agregado graúdo - Determinação do índice de forma pelo método do paquímetro - Método de ensaio. NBR 7809. Rio de Janeiro. 2019.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Amostragem de resíduos sólidos. NBR 10007. Rio de Janeiro. 2004.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Concreto – Procedimento para moldagem e cura de corpos de prova. NBR 5738. Rio de Janeiro. 2015.
ADEGOLOYE, G., BEAUCOUR, A., ORTOLA, S., AND NOUMOWÉ, A. (2015). Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability. Construction and Building Materials, 10.1016/ j.conbuildmat.2014.12.007, 313-321. Online publication date: 1-Fev-2014. DOI: https://doi.org/10.1016/j.conbuildmat.2014.12.007
CAO, Q.; NAWAZ, U.; JIANG, X.; ZHANG, L.; ANSARI, W. S. Efeito do agregado de escória de alto-forno refrigerado a ar nas propriedades mecânicas do concreto de ultra-alto desempenho. Case Studies in Construction Materials, v. 16, e01027, 2022. DOI: 10.1016/j.cscm.2022.e01027. DOI: https://doi.org/10.1016/j.cscm.2022.e01027
H. Beshr, A. A. Almusallam, M. Maslehuddin. Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Construction and Building Materials, 17 (2002), p. 97-103. DOI: https://doi.org/10.1016/S0950-0618(02)00097-1
ÖZBAY, E.; ERDEMIR, M.; DURMUŞ, H. İ. Utilization and efficiency of ground granulated blast furnace slag on concrete properties. A review. Construction and Building Materials, v. 105, p. 423–434, 2016. DOI: 10.1016/j.conbuildmat.2015.12.153. DOI: https://doi.org/10.1016/j.conbuildmat.2015.12.153
OZBAKKALOGLU, T.; GU, L.; FALLAH POUR, A. Normal- and high-strength concretes incorporating air-cooled blast furnace slag coarse aggregates: Effect of slag size and content on the behavior. Construction and Building Materials, v. 126, p. 138–146, 2016. DOI: 10.1016/j.conbuildmat.2016.09.015. DOI: https://doi.org/10.1016/j.conbuildmat.2016.09.015
MOHAMED, O. A.; GHANAM, O.; HAMDAN, A.; et al. Mechanical properties and durability of concrete with recycled air-cooled blast furnace slag aggregates. Scientific Reports, v. 15, 24384, 2025. DOI: 10.1038/s41598-025-09242-1. DOI: https://doi.org/10.1038/s41598-025-09242-1
ZHANG, P.; WANG, W.; ZHENG, Y.; HU, S. Effect of recycled aggregate and slag as substitutes for natural aggregate and cement on the properties of concrete: A review. Journal of Renewable Materials, v. 11, n. 4, p. 1853–1879, 2023. DOI: 10.32604/jrm.2023.024981. DOI: https://doi.org/10.32604/jrm.2023.024981
Published
Issue
Section
License
Copyright (c) 2026 Adriano Luiz Roma Vasconcelos, João Carlos Lisboa de Lima, Elielson Oliveira de Sousa, Aedjota Matos de Jesus, Sabino Alves De Aguiar Neto, Patrícia da Silva Chaves, Dênio Ramam Carvalho de Oliveira, Vitor Hugo Lopes Branco, Thiago Rodrigues Gonçalves Caetano, Aldemar Batista Tavares de Sousa, Luis Felipe Alencar Brandão, Mike Da Silva Pereira, Wilson Damasceno Monteiro Junior, Anderson Carlos Galindo Silva, Valdinei de Sousa Lima

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish in this journal agree to the following terms:
Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution License, which permits the sharing of the work with proper acknowledgment of authorship and initial publication in this journal;
Authors are authorized to enter into separate, additional agreements for the non-exclusive distribution of the version of the work published in this journal (e.g., posting in an institutional repository or publishing it as a book chapter), provided that authorship and initial publication in this journal are properly acknowledged, and that the work is adapted to the template of the respective repository;
Authors are permitted and encouraged to post and distribute their work online (e.g., in institutional repositories or on their personal websites) at any point before or during the editorial process, as this may lead to productive exchanges and increase the impact and citation of the published work (see The Effect of Open Access);
Authors are responsible for correctly providing their personal information, including name, keywords, abstracts, and other relevant data, thereby defining how they wish to be cited. The journal’s editorial board is not responsible for any errors or inconsistencies in these records.
PRIVACY POLICY
The names and email addresses provided to this journal will be used exclusively for the purposes of this publication and will not be made available for any other purpose or to third parties.
Note: All content of the work is the sole responsibility of the author and the advisor.
