USE OF CONE BEAM TOMOGRAPHY FOR IMMEDIATE LOADING PLANNING IN UPPER protocol: a case report

Authors

  • Manassés Tercio Vieira Grangeiro Anhanguera College
  • Samir de Moura Gonçalves Leite UNESP
  • Paula Roberta Pires Miranda UNESP
  • Cindy Meriane Alves de Oliveira FACULDADE ANHANGUERA
  • Camila da Silva Rodrigues UNESP
  • Natália Rivoli Rossi UNESP
  • Layra Catarina Rocha Muramatsu UNESP
  • Pedro Henrique Condé Oliveira Prado UNESP

DOI:

https://doi.org/10.66104/cnwp3v87

Keywords:

Cone beam, Implantology, Computed tomography

Abstract

This study aimed to report the use of cone beam computed tomography for immediate loading planning in the upper protocol through a clinical case. A 61-year-old patient presented to the oral rehabilitation clinic with a complaint of ill-fitting dentures and missing teeth in the maxillary region. After clinical and radiographic evaluation, including cone beam computed tomography, the proposed treatment involved surgery for the insertion of four implants and the fabrication of a fixed full prosthesis over the implants.

Downloads

Download data is not yet available.

References

ADELL, R. et al. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. International Journal of Oral Surgery, v. 10, p. 387–416, 1981. DOI: https://doi.org/10.1016/S0300-9785(81)80077-4

BORNSTEIN, M. M.; HORNER, K.; JACOBS, R. Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research. Periodontology 2000, v. 73, n. 1, p. 51–72, 2017. DOI: https://doi.org/10.1111/prd.12161

BRANEMARK, P. I. et al. Osseointegrated implants in the treatment of the edentulous jaw: experience from a 10-year period. Scandinavian Journal of Plastic and Reconstructive Surgery Supplementum, v. 16, p. 1–132, 1977.

BRÅNEMARK, P. I.; SVENSSON, B.; VAN STEENBERGHE, D. Ten-year survival rates of fixed prostheses on four or six implants ad modum Brånemark in full edentulism. Clinical Oral Implants Research, v. 6, p. 227–231, 1995. DOI: https://doi.org/10.1034/j.1600-0501.1995.060405.x

BRAUT, V. et al. Bone dimensions in the posterior mandible: a retrospective radiographic study using cone beam computed tomography. Part 2: analysis of edentulous sites. International Journal of Periodontics and Restorative Dentistry, v. 34, n. 5, p. 639–647, 2014. DOI: https://doi.org/10.11607/prd.1895

BORNSTEIN, M. M.; SCARFE, W. C.; VAUGHN, V. M.; JACOBS, R. Cone beam computed tomography in implant dentistry: a systematic review focusing on guidelines, indications, and radiation dose risks. International Journal of Oral & Maxillofacial Implants, v. 29, n. Suppl., p. 55–77, 2014. DOI: https://doi.org/10.11607/jomi.2014suppl.g1.4. DOI: https://doi.org/10.11607/jomi.2014suppl.g1.4

CAPELLI, M. et al. Immediate rehabilitation of the completely edentulous jaw with fixed prostheses supported by either upright or tilted implants: a multicenter clinical study. International Journal of Oral and Maxillofacial Implants, v. 22, n. 4, 2007.

DE OLIVEIRA, M. S.; PARAGUASSU, É. C. Intercorrências com implante em seio maxilar: relato de caso. Brazilian Journal of Implantology and Health Sciences, v. 4, n. 2, p. 74–86, 2022. DOI: https://doi.org/10.36557/2674-8169.2022v4n2p18-30

DE OLIVEIRA, D. W. D. et al. Dental implants with immediate loading using insertion torque of 30 Ncm: a systematic review. Implant Dentistry, v. 25, n. 5, p. 675–683, 2016. DOI: https://doi.org/10.1097/ID.0000000000000444

DURKAN, R.; OYAR, P.; DESTE, G. Effects of cantilever length and implant inclination on the stress distribution of mandibular prosthetic restorations constructed from monolithic zirconia ceramic. International Journal of Oral and Maxillofacial Implants, v. 35, n. 1, 2020. DOI: https://doi.org/10.11607/jomi.7744

ERKAPERS, M. et al. The influence of immediately loaded implant treatment in the atrophic edentulous maxilla on oral health related quality of life of edentulous patients: 3-year results of a prospective study. Head & Face Medicine, v. 13, n. 1, p. 21, 2017. DOI: https://doi.org/10.1186/s13005-017-0154-0

GALVÃO, J. B. M. et al. Confecção de guia multifuncional para planejamento de reabilitação implantossuportada: relato de caso. Revista Ciência Plural, v. 9, n. 3, p. 1–13, 2023. DOI: https://doi.org/10.21680/2446-7286.2023v9n3ID32618

JACOBS, R. et al. Cone beam computed tomography in implant dentistry: recommendations for clinical use. BMC Oral Health, v. 18, n. 1, p. 88, 2018. DOI: https://doi.org/10.1186/s12903-018-0523-5. DOI: https://doi.org/10.1186/s12903-018-0523-5

KHORSHID, H. E.; HAMED, H. A.; AZIZ, E. A. The effect of two different immediate loading protocols in implant-supported screw-retained prostheses. Implant Dentistry, v. 20, n. 2, p. 157–166, 2011. DOI: 10.1097/ID.0b013e31820fbd09. DOI: https://doi.org/10.1097/ID.0b013e31820fbd09

LUDLOW, J. B.; IVANOVIC, M. Comparative dosimetry of dental CBCT devices and 64-slice CT for oral and maxillofacial radiology. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology and Endodontology, v. 106, n. 1, p. 106–114, 2008. DOI: https://doi.org/10.1016/j.tripleo.2008.03.018

MALÓ, P. et al. Immediate function dental implants inserted with less than 30 N·cm of torque in full-arch maxillary rehabilitations using the All-on-4 concept: retrospective study. International Journal of Oral and Maxillofacial Surgery, v. 47, n. 8, p. 1079–1085, 2018. DOI: 10.1016/j.ijom.2018.04.008 DOI: https://doi.org/10.1016/j.ijom.2018.04.008

MALÓ, P.; RANGERT, B.; NOBRE, M. “All-on-four” immediate-function concept with Brånemark System implants for completely edentulous mandibles: a retrospective clinical study. Clinical Implant Dentistry and Related Research, v. 5, p. 2–9, 2003. DOI: https://doi.org/10.1111/j.1708-8208.2003.tb00010.x

NAJAFI, H. et al. Effects of immediate and delayed loading on the outcomes of All-on-4 treatment: a prospective study. Journal of Dentistry (Tehran), v. 13, n. 6, p. 415, 2016.

OMAMI, G.; AL YAFI, F. Should cone beam computed tomography be routinely obtained in implant planning? Dental Clinics of North America, v. 63, n. 3, p. 363–379, jul. 2019. DOI: https://doi.org/10.1016/j.cden.2019.02.005. DOI: https://doi.org/10.1016/j.cden.2019.02.005

OZAN, O.; KURTULMUS-YILMAZ, S. Biomechanical comparison of different implant inclinations and cantilever lengths in All-on-4 treatment concept by three-dimensional finite element analysis. International Journal of Oral and Maxillofacial Implants, v. 33, n. 1, 2018. DOI: https://doi.org/10.11607/jomi.6201

SALVI, G. et al. Clinical and radiographic changes at tissue level implants with either a machined or a modified transmucosal neck surface: a 3-year multicentre randomized controlled proof-of-concept study. Journal of Clinical Periodontology, 2020. DOI: https://doi.org/10.1111/jcpe.13249. DOI: https://doi.org/10.1111/jcpe.13249

SCHULZE, R. et al. Determination of projection geometry from quantitative assessment of the distortion of spherical references in single-view projection radiography. Medical Physics, v. 31, n. 10, p. 2849–2854, 2004. DOI: https://doi.org/10.1118/1.1796951

SHACKLETON, J. L. et al. Survival of fixed implant-supported prostheses related to cantilever lengths. Journal of Prosthetic Dentistry, v. 71, p. 23–26, 1994. DOI: https://doi.org/10.1016/0022-3913(94)90250-X

STRUB, J. R.; JURDZIK, B. A.; TUNA, T. Prognosis of immediately loaded implants and their restorations: a systematic literature review. Journal of Oral Rehabilitation, v. 39, n. 9, p. 704–717, 2012. DOI: https://doi.org/10.1111/j.1365-2842.2012.02315.x

Downloads

Published

2026-03-23

Issue

Vol. 13 No. 03 (2026): REMUNOM - ISSN 2178-6925

Section

Artigos

License

Copyright (c) 2026 Manassés Grangeiro, Samir de Moura Gonçalves Leite, Paula Roberta Pires Miranda, Cindy Meriane Alves de Oliveira, Camila da Silva Rodrigues, Natália Rivoli Rossi, Layra Catarina Rocha Muramatsu, Pedro Henrique Condé Oliveira Prado

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish in this journal agree to the following terms:

Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution License, which permits the sharing of the work with proper acknowledgment of authorship and initial publication in this journal;

Authors are authorized to enter into separate, additional agreements for the non-exclusive distribution of the version of the work published in this journal (e.g., posting in an institutional repository or publishing it as a book chapter), provided that authorship and initial publication in this journal are properly acknowledged, and that the work is adapted to the template of the respective repository;

Authors are permitted and encouraged to post and distribute their work online (e.g., in institutional repositories or on their personal websites) at any point before or during the editorial process, as this may lead to productive exchanges and increase the impact and citation of the published work (see The Effect of Open Access);

Authors are responsible for correctly providing their personal information, including name, keywords, abstracts, and other relevant data, thereby defining how they wish to be cited. The journal’s editorial board is not responsible for any errors or inconsistencies in these records.

PRIVACY POLICY

The names and email addresses provided to this journal will be used exclusively for the purposes of this publication and will not be made available for any other purpose or to third parties.

Note: All content of the work is the sole responsibility of the author and the advisor.

How to Cite

USE OF CONE BEAM TOMOGRAPHY FOR IMMEDIATE LOADING PLANNING IN UPPER protocol: a case report. (2026). REMUNOM, 13(03), 1-17. https://doi.org/10.66104/cnwp3v87