USE OF CONE BEAM TOMOGRAPHY FOR IMMEDIATE LOADING PLANNING IN UPPER protocol: a case report
DOI:
https://doi.org/10.66104/cnwp3v87Palavras-chave:
Cone beam, Implantodontia, Tomografia computadorizadaResumo
This study aimed to report the use of cone beam computed tomography for immediate loading planning in the upper protocol through a clinical case. A 61-year-old patient presented to the oral rehabilitation clinic with a complaint of ill-fitting dentures and missing teeth in the maxillary region. After clinical and radiographic evaluation, including cone beam computed tomography, the proposed treatment involved surgery for the insertion of four implants and the fabrication of a fixed full prosthesis over the implants.
Downloads
Referências
ADELL, R. et al. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. International Journal of Oral Surgery, v. 10, p. 387–416, 1981. DOI: https://doi.org/10.1016/S0300-9785(81)80077-4
BORNSTEIN, M. M.; HORNER, K.; JACOBS, R. Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research. Periodontology 2000, v. 73, n. 1, p. 51–72, 2017. DOI: https://doi.org/10.1111/prd.12161
BRANEMARK, P. I. et al. Osseointegrated implants in the treatment of the edentulous jaw: experience from a 10-year period. Scandinavian Journal of Plastic and Reconstructive Surgery Supplementum, v. 16, p. 1–132, 1977.
BRÅNEMARK, P. I.; SVENSSON, B.; VAN STEENBERGHE, D. Ten-year survival rates of fixed prostheses on four or six implants ad modum Brånemark in full edentulism. Clinical Oral Implants Research, v. 6, p. 227–231, 1995. DOI: https://doi.org/10.1034/j.1600-0501.1995.060405.x
BRAUT, V. et al. Bone dimensions in the posterior mandible: a retrospective radiographic study using cone beam computed tomography. Part 2: analysis of edentulous sites. International Journal of Periodontics and Restorative Dentistry, v. 34, n. 5, p. 639–647, 2014. DOI: https://doi.org/10.11607/prd.1895
BORNSTEIN, M. M.; SCARFE, W. C.; VAUGHN, V. M.; JACOBS, R. Cone beam computed tomography in implant dentistry: a systematic review focusing on guidelines, indications, and radiation dose risks. International Journal of Oral & Maxillofacial Implants, v. 29, n. Suppl., p. 55–77, 2014. DOI: https://doi.org/10.11607/jomi.2014suppl.g1.4. DOI: https://doi.org/10.11607/jomi.2014suppl.g1.4
CAPELLI, M. et al. Immediate rehabilitation of the completely edentulous jaw with fixed prostheses supported by either upright or tilted implants: a multicenter clinical study. International Journal of Oral and Maxillofacial Implants, v. 22, n. 4, 2007.
DE OLIVEIRA, M. S.; PARAGUASSU, É. C. Intercorrências com implante em seio maxilar: relato de caso. Brazilian Journal of Implantology and Health Sciences, v. 4, n. 2, p. 74–86, 2022. DOI: https://doi.org/10.36557/2674-8169.2022v4n2p18-30
DE OLIVEIRA, D. W. D. et al. Dental implants with immediate loading using insertion torque of 30 Ncm: a systematic review. Implant Dentistry, v. 25, n. 5, p. 675–683, 2016. DOI: https://doi.org/10.1097/ID.0000000000000444
DURKAN, R.; OYAR, P.; DESTE, G. Effects of cantilever length and implant inclination on the stress distribution of mandibular prosthetic restorations constructed from monolithic zirconia ceramic. International Journal of Oral and Maxillofacial Implants, v. 35, n. 1, 2020. DOI: https://doi.org/10.11607/jomi.7744
ERKAPERS, M. et al. The influence of immediately loaded implant treatment in the atrophic edentulous maxilla on oral health related quality of life of edentulous patients: 3-year results of a prospective study. Head & Face Medicine, v. 13, n. 1, p. 21, 2017. DOI: https://doi.org/10.1186/s13005-017-0154-0
GALVÃO, J. B. M. et al. Confecção de guia multifuncional para planejamento de reabilitação implantossuportada: relato de caso. Revista Ciência Plural, v. 9, n. 3, p. 1–13, 2023. DOI: https://doi.org/10.21680/2446-7286.2023v9n3ID32618
JACOBS, R. et al. Cone beam computed tomography in implant dentistry: recommendations for clinical use. BMC Oral Health, v. 18, n. 1, p. 88, 2018. DOI: https://doi.org/10.1186/s12903-018-0523-5. DOI: https://doi.org/10.1186/s12903-018-0523-5
KHORSHID, H. E.; HAMED, H. A.; AZIZ, E. A. The effect of two different immediate loading protocols in implant-supported screw-retained prostheses. Implant Dentistry, v. 20, n. 2, p. 157–166, 2011. DOI: 10.1097/ID.0b013e31820fbd09. DOI: https://doi.org/10.1097/ID.0b013e31820fbd09
LUDLOW, J. B.; IVANOVIC, M. Comparative dosimetry of dental CBCT devices and 64-slice CT for oral and maxillofacial radiology. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology and Endodontology, v. 106, n. 1, p. 106–114, 2008. DOI: https://doi.org/10.1016/j.tripleo.2008.03.018
MALÓ, P. et al. Immediate function dental implants inserted with less than 30 N·cm of torque in full-arch maxillary rehabilitations using the All-on-4 concept: retrospective study. International Journal of Oral and Maxillofacial Surgery, v. 47, n. 8, p. 1079–1085, 2018. DOI: 10.1016/j.ijom.2018.04.008 DOI: https://doi.org/10.1016/j.ijom.2018.04.008
MALÓ, P.; RANGERT, B.; NOBRE, M. “All-on-four” immediate-function concept with Brånemark System implants for completely edentulous mandibles: a retrospective clinical study. Clinical Implant Dentistry and Related Research, v. 5, p. 2–9, 2003. DOI: https://doi.org/10.1111/j.1708-8208.2003.tb00010.x
NAJAFI, H. et al. Effects of immediate and delayed loading on the outcomes of All-on-4 treatment: a prospective study. Journal of Dentistry (Tehran), v. 13, n. 6, p. 415, 2016.
OMAMI, G.; AL YAFI, F. Should cone beam computed tomography be routinely obtained in implant planning? Dental Clinics of North America, v. 63, n. 3, p. 363–379, jul. 2019. DOI: https://doi.org/10.1016/j.cden.2019.02.005. DOI: https://doi.org/10.1016/j.cden.2019.02.005
OZAN, O.; KURTULMUS-YILMAZ, S. Biomechanical comparison of different implant inclinations and cantilever lengths in All-on-4 treatment concept by three-dimensional finite element analysis. International Journal of Oral and Maxillofacial Implants, v. 33, n. 1, 2018. DOI: https://doi.org/10.11607/jomi.6201
SALVI, G. et al. Clinical and radiographic changes at tissue level implants with either a machined or a modified transmucosal neck surface: a 3-year multicentre randomized controlled proof-of-concept study. Journal of Clinical Periodontology, 2020. DOI: https://doi.org/10.1111/jcpe.13249. DOI: https://doi.org/10.1111/jcpe.13249
SCHULZE, R. et al. Determination of projection geometry from quantitative assessment of the distortion of spherical references in single-view projection radiography. Medical Physics, v. 31, n. 10, p. 2849–2854, 2004. DOI: https://doi.org/10.1118/1.1796951
SHACKLETON, J. L. et al. Survival of fixed implant-supported prostheses related to cantilever lengths. Journal of Prosthetic Dentistry, v. 71, p. 23–26, 1994. DOI: https://doi.org/10.1016/0022-3913(94)90250-X
STRUB, J. R.; JURDZIK, B. A.; TUNA, T. Prognosis of immediately loaded implants and their restorations: a systematic literature review. Journal of Oral Rehabilitation, v. 39, n. 9, p. 704–717, 2012. DOI: https://doi.org/10.1111/j.1365-2842.2012.02315.x
Downloads
Publicado
Edição
Seção
Licença
Copyright (c) 2026 Manassés Grangeiro, Samir de Moura Gonçalves Leite, Paula Roberta Pires Miranda, Cindy Meriane Alves de Oliveira, Camila da Silva Rodrigues, Natália Rivoli Rossi, Layra Catarina Rocha Muramatsu, Pedro Henrique Condé Oliveira Prado
Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
Autores que publicam nesta revista concordam com os seguintes termos:
- Autores mantém os direitos autorais e concedem à revista o direito de primeira publicação, com o trabalho simultaneamente licenciado sob a Licença Creative Commons Attribution que permite o compartilhamento do trabalho com reconhecimento da autoria e publicação inicial nesta revista;
- Autores têm autorização para assumir contratos adicionais separadamente, para distribuição não-exclusiva da versão do trabalho publicada nesta revista (ex.: publicar em repositório institucional ou como capítulo de livro), com reconhecimento de autoria e publicação inicial nesta revista, desde que adpatado ao template do repositório em questão;
- Autores têm permissão e são estimulados a publicar e distribuir seu trabalho online (ex.: em repositórios institucionais ou na sua página pessoal) a qualquer ponto antes ou durante o processo editorial, já que isso pode gerar alterações produtivas, bem como aumentar o impacto e a citação do trabalho publicado (Veja O Efeito do Acesso Livre).
- Os autores são responsáveis por inserir corretamente seus dados, incluindo nome, palavras-chave, resumos e demais informações, definindo assim a forma como desejam ser citados. Dessa forma, o corpo editorial da revista não se responsabiliza por eventuais erros ou inconsistências nesses registros.
POLÍTICA DE PRIVACIDADE
Os nomes e endereços informados nesta revista serão usados exclusivamente para os serviços prestados por esta publicação, não sendo disponibilizados para outras finalidades ou a terceiros.
Obs: todo o conteúdo do trabalho é de responsabilidade do autor e orientador.
